Sony VideoStore BKSR-2030 설치 매뉴얼 - 페이지 8
{카테고리_이름} Sony VideoStore BKSR-2030에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony VideoStore BKSR-2030 14 페이지. Sdi output mpeg decoder board
Sony VideoStore BKSR-2030에 대해서도 마찬가지입니다: 운영 지침 (2 페이지)
페이지 인쇄
1-2. Board Installation
General Information
. The BKSR-2030 can be inserted into any slot exept slot
No.6 of VSR-2000 is mounted to.
VSR-2000 (Rear side)
. Stick the slot label supplied with the BKSR-2030 onto
the connector panel after the board installation to prevent
the incorrect insertion when the board replacing.
. Do not open the slot to keep the air-cooled effect of
VSR-2000. Be sure to attach the blank panel to vacant
slot.
. It is not necessary to adjust after board installation/
replacement.
Procedures
1. Turn off the power switch of the VSR-2000.
2. Remove the two screws, and remove the blank panel
of any slot.
n
Keep the removed blank panel.
1-2 (E)
Slot No.6
VSR-2000
BVTT
3 x 6
Blank panel
BVTT3 x 6
3. Insert the BKSR-2030 to the slot. Push the handle of
the board in the direction of installing, and insert it in
the mother board completely.
Installing
Removing
4. Secure the BKSR-2030 with the two screws securing
the blank panel.
5. Stick the slot label supplied with the BKSR-2030 onto
the connector panel.
The label's number is the same as the slot number
which the board has inserted.
BKSR-2030
n
To remove the BKSR-2030, hold the handle of the board
and pull it in the direction of removing and remove the
board to the front.
BKSR-2030
Handles
BVTT
3 x 6
Slot label
BKSR-2030