Sony ZS-BT1 - Boombox With Bluetooth Technology Instruções de utilização
Procurar online ou descarregar pdf Instruções de utilização para Sistema estéreo Sony ZS-BT1 - Boombox With Bluetooth Technology. Sony ZS-BT1 - Boombox With Bluetooth Technology 2 páginas. Limited warranty (u.s. only)
Também para Sony ZS-BT1 - Boombox With Bluetooth Technology: Especificações (2 páginas), Manual (16 páginas), Garantia limitada (1 páginas)
Imprimir página
Personal Audio System
Operating Instructions
Owner's Record
The model number is located at the bottom and the serial number is located in the battery compartment.
Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No.
Serial No.
ZS-BT1
© 2007 Sony Corporation
Printed in China
WARNING
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
To reduce the risk of fire, do not cover the ventilation of
the apparatus with newspapers, tablecloths, curtains, etc.
And do not place lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not place
This symbol is intended to alert the
objects filled with liquids, such as vases, on the apparatus.
user to the presence of uninsulated
Connect the apparatus to an easily accessible AC
"dangerous voltage" within the product's
outlet. Should you notice an abnormality in the
enclosure that may be of sufficient
apparatus, disconnect the main plug from the AC outlet
magnitude to constitute a risk of electric
immediately.
shock to persons.
Do not install the appliance in a confined space, such as a
This symbol is intended to alert the user
bookcase or built-in cabinet.
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the
appliance.
Power sources
2
to a wall
1
outlet
to AC IN
Connect the AC power cord or insert six R20 (size D) batteries (not supplied) into the battery compartment .
Notes
Replace the batteries when the OPR/BATT indicator
dims or when the unit stops operating.
Replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the unit.
To use the unit on batteries, disconnect the AC power cord from the unit.
When you operate the unit on batteries, you cannot turn on the unit using the remote.
Preparing the remote
Insert two R6 (size AA) batteries (not supplied).
Replacing batteries
With normal use, the batteries should last for about six months. When the remote no longer operates the unit, replace all
the batteries with new ones.
CAUTION
Music discs encoded with copyright
protection technologies
The use of optical instruments with this product will
3-099-777-21(1)
increase eye hazard.
This product is designed to playback discs that conform
to the Compact Disc (CD) standard. Recently, various
Information
music discs encoded with copyright protection
technologies are marketed by some record companies.
For customers in the USA
Please be aware that among those discs, there are some
This equipment has been tested and found to comply
that do not conform to the CD standard and may not be
with the limits for a Class B digital device, pursuant
playable by this product.
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
For customers in the USA
interference in a residential installation. This equipment
US
generates, uses and can radiate radio frequency energy
Please register this product on line at
and, if not installed and used in accordance with the
http://www.sony.com/productregistration
instructions, may cause harmful interference to radio
Proper registration will enable us to send you periodic
communications. However, there is no guarantee that
mailings about new product, services and other
interference will not occur in a particular installation. If
important announcements. Registering your product
this equipment does cause harmful interference to radio
will also allow us to contact you in the unlikely event
or television reception, which can be determined by
that the product needs adjustment or modification.
turning the equipment off and on, the user is encouraged
Thank you.
to try to correct the interference by one or more of the
following measures:
The Bluetooth word mark and logos are owned by the
— Reorient or relocate the receiving antenna.
Bluetooth SIG, Inc. and any use of such marks by Sony
— Increase the separation between the equipment and
Corporation is under license. Other trademarks and
receiver.
trade names are those of their respective owners.
— Connect the equipment into an outlet on a circuit
TM and (R) marks are omitted in this manual.
different from that to which the receiver is connected.
MPEG Layer-3 audio coding technology and patents
— Consult the dealer or an experienced radio/TV
licensed from Fraunhofer IIS and Thomson.
technician for help.
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.
This equipment must not be co-located or operated in
conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure
limits set forth for uncontrolled equipment and meets
the FCC radio frequency (RF) Exposure Guidelines in
Supplement C to OET65.
This equipment has very low levels of RF energy that
it deemed to comply without maximum permissive
exposure evaluation (MPE). But it is desirable that it
should be installed and operated with at least 20cm and
more between the radiator and person's body (excluding
extremities: hands, wrists, feet and legs).
Notes on DualDiscs
A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital
audio material on the other side. However, since the
audio material side does not conform to the Compact
Disc (CD) standard, playback on this product is not
guaranteed.
Specifications
AUDIO POWER SPECIFICATIONS
Battery life
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
For player:
With 3.2-ohm loads, both channels driven from 150 - 6 000 Hz; rated 1.8 W
FM Radio reception
per channel-minimum RMS power, with no more than 10 % total harmonic
Sony R20P: approx. 15 h
distortion in AC operation.
Sony alkaline LR20: approx. 36 h
Other specifications
CD playback
CD player section
Sony R20P: approx. 5 h
System
Sony alkaline LR20: approx. 14 h
Compact disc digital audio system
It is recommended that you use alkaline batteries.
Laser diode properties
Dimensions
Emission duration: Continuous
Approx. 480 × 156 × 250 mm (w/h/d)
Laser output: Less than 44.6 µW
(19 × 6
(This output is the value measured at a distance of
Mass
about 200 mm from the objective lens surface on the
Approx. 4.3 kg (9 lb. 8 oz) (incl. batteries)
optical pick-up block with 7 mm aperture.)
Supplied accessories
Number of channels
AC power cord (1)
2
Frequency response
Remote control (1)
20 - 20 000 Hz +1/–1 dB
Wow and flutter
Design and specifications are subject to change without notice.
Below measurable limit
Optional accessories
Radio section
Sony MDR headphones series
Frequency range
FM: 87.5 - 108 MHz
AM: 530 - 1 710 kHz
Antennas
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
General
Speaker
Full range: 10 cm (4 in.) dia., 3.2
, cone type (2)
Input
AUDIO IN jack (stereo minijack): Minimum input level 245 mV
Outputs
Headphones jack (stereo minijack)
For 16 - 64
impedance headphones
Power output
2.3 W + 2.3 W (at 3.2
, 10% harmonic distortion)
Power requirements
For player:
120 V AC, 60 Hz
9 V DC, 6 R20 (size D) batteries
For remote control:
3 V DC, 2 R06 (size AA) batteries
Power consumption
AC 14 W
Bluetooth section
Communication system:
Bluetooth Standard version 2.0
Output:
Bluetooth Standard Power Class 2
Maximum communication range:
Line of sight approx. 10 m
1)
Frequency band:
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method:
FHSS
Compatible Bluetooth profiles
2)
:
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
Supported codecs:
Receive: SBC (Sub Band Codec), MP3
Transmit: SBC (Sub Band Codec)
1)
The actual range will vary depending on factors such as obstacles between
devices, magnetic fields around a microwave oven, static electricity,
reception sensitivity, antenna's performance, operating system, software
application, etc.
2)
Bluetooth standard profiles indicate the purpose of Bluetooth
communication between devices.
Basic Operations
* VOLUME +
and
on the unit have a tactile dot.
Before using the unit
To turn on/off the power
Press POWER
.
To adjust the volume
Press VOLUME +, –
.
To listen through headphones
Connect the headphones to the (headphones) jack .
To select the sound characteristic
Press SOUND
repeatedly to select the audio emphasis
you want.
Choose
To get
Powerful, clean sounds, emphasizing low and
high range audio
Light, bright sounds emphasizing high and
middle range audio
Percussive sounds, emphasizing bass audio
The presence of vocals, stressing middle
1
/4 × 9
7
/
inches) (incl. projecting parts)
range audio
8
The whole dynamic range for music such as
classical music
To reinforce the bass sound
Press MEGA BASS
to display "MEGA BASS" in the
display.
To return to normal sound, press MEGA BASS
disappear from the display.
Note
MEGA BASS does not function when you use the Bluetooth
headphones to listen to a sound source other than through the
Bluetooth function (e.g., CD, radio, or AUDIO IN).
Playing a CD
1
Press CD
on the unit.
"CD" appears in the display.
2
Press
on the unit, and place a disc with the
label side up on the CD tray.
To close the CD tray, press
on the unit.
3
Press
on the unit.
The unit plays all the tracks once.
Track number
Playing time
4
Enter the passcode.
To
Press
Passcode entry may be required depending on the
Pause playback
. To resume play, press it again.
type of Bluetooth device.
Stop playback
.
When "PIN" appears, enter the passcode at the unit
Go to the next track
(
on the remote)
.
as follows:
Go back to the
(
on the remote)
.
previous track
Locate a point while
(forward) or
listening to the sound
(backward)
while playing and hold it
until you find the point. (On the remote,
use
or
)
Press
,
Locate a point while
(forward) or
+ and
observing the display
(backward)
in pause and hold it until
to enter the same passcode that was entered at the
you find the point. (On the remote, use
Bluetooth device, and then press ENTER
or
)
and
Remove the CD
.
select the digit, and and (
change the value.
On the remote
Once pairing is completed and the connection is
To select CD function, press CD
.
established, the unit display changes as follows:
"LINKED" Name of the Bluetooth device
Notes
When pressing
(
,
, , ) on the unit, press
To cancel passcode entry partway
the marking at the part near the outer edge.
You cannot locate a specific track if "SHUF" or "PGM" is lit in the
Press
.
display. Press
, and then press MODE
repeatedly until
"SHUF" and "PGM" disappears from the display.
Notes
"Passcode" may be called "Passkey", "PIN code", "PIN number" or
"Password", etc. depending on the device.
This unit only supports numerical passcodes up to 4 digits.
Listening to the radio
The pairing standby status of the unit is cancelled after about 30
seconds. If pairing is not successful, redo the procedure from step 1.
While connected to a Bluetooth device, this unit cannot be detected
and a connection cannot be established from another Bluetooth
To listen to FM or AM
device.
1
Press RADIO BAND
AUTO PRESET
on the unit
To erase all the pairing registration information
(RADIO
BAND
on the remote) repeatedly to
select FM or AM.
1
Press BLUETOOTH
2
Hold down TUNE + or –
until the frequency digits
When the unit is connected with a Bluetooth
begin to change in the display.
device (when the Bluetooth device name or other
The unit automatically scans the radio frequencies and
information appears in the unit display), press and
stops when it finds a clear station.
hold BLUETOOTH OPR
If you cannot tune in a station, press TUNE + or –
seconds to put the unit in Bluetooth standby mode.
repeatedly to change the frequency step by step.
2
Press CLEAR
When an FM stereo broadcast is received, "ST"
"DELETE" appears.
appears.
3
Press ENTER
Tip
"COMPLETE" appears and all the pairing information
If the FM broadcast is noisy, press MODE
until "MONO" appears
is erased.
in the display and the radio will play in monaural.
Note
In order to connect with a Bluetooth device after performing this
operation, you must enter the passcode again.
Using the Bluetooth function
Playing music of a Bluetooth device
This unit supports Bluetooth A2DP and AVRCP profiles.
You can operate a Bluetooth device by connecting the
For details on Bluetooth wireless technology, see
unit and a Bluetooth device using AVRCP. If the unit is
"Bluetooth wireless technology" on the back page.
not connected with a Bluetooth device using AVRCP,
"NOT USED" appears when you operate the unit.
Check the websites below for the latest information about
1
Press BLUETOOTH
compatible devices.
<http://www.sony.com/support>
2
Establish a connection from the Bluetooth device.
For details about the operations of the Bluetooth
Listening to music of a Bluetooth mobile
device, refer to the operation manual supplied with
phone or Bluetooth device
your Bluetooth device.
Once the connection is established, the unit display
You can listen to music from your Bluetooth mobile
changes as follows:
phone or Bluetooth device over a wireless connection.
"LINKED" Name of the Bluetooth device
3
Press
.
Depending on the Bluetooth device, you may need
to start up the AV software of the Bluetooth device
beforehand.
4
Press VOLUME + or – to adjust the volume
To check the address of a connected Bluetooth
device
Press DISPLAY
appears in the unit display.
The Bluetooth device address appears.
Follow the procedure below to listen to music from
To cancel the connection with a Bluetooth
Bluetooth devices with this unit.
device
to
Press and hold BLUETOOTH OPR
Pairing this unit with a Bluetooth device
about 2 seconds until "UNLINKED" appears, or until
the information on the display (device name, etc.)
Connecting to registered devices
disappears.
Playing music of a Bluetooth device
Other operation
To
For details about the operations of the Bluetooth device,
also refer to the operation manual supplied with your
Pause playback
Bluetooth device.
Stop playback
Select a file
Pairing this unit with a Bluetooth device
Pairing is an operation where Bluetooth devices register
Find a point in a file
with each other beforehand. Use the procedure below to
pair the unit with your Bluetooth device. Once a pairing
operation is performed, it does not need to be performed
Note
again. If pairing is already completed, proceed to "Playing
These operations may not be available for certain Bluetooth devices.
music of a Bluetooth device" on this page.
In addition, the actual operations may differ depending on the
connected Bluetooth device.
1
Place the Bluetooth device to be connected to this
unit within 1 meter of the unit.
Notes on connections with Bluetooth devices
2
If you cannot connect with a paired Bluetooth device,
Press BLUETOOTH
.
perform the pairing operation between the unit and the
3
Operate the Bluetooth device and perform the
Bluetooth device again.
pairing operation.
Depending on the type of Bluetooth device, you can
For details about the operations of the Bluetooth
adjust the volume using the controls of the Bluetooth
device, refer to the operation manual supplied with
device.
your Bluetooth device.
When BLUETOOTH
When establishing a connection with this unit, select
Bluetooth headphones, it may take some time until a
the audio profile (A2DP, AVRCP) at the Bluetooth
connection is made to the unit from another Bluetooth
device. If the Bluetooth device does not support the
device.
AVRCP profile, you cannot perform playback or other
operations with the unit (See "Playing music on this
unit" on the back page).
Listening to music on this unit using
Bluetooth headphones
You can listen to music played on this unit using your
Bluetooth headphones over a wireless connection.
, , on the unit (
–,
,
on the remote)
. Use
(
and
) to
– and
+) to
Follow the procedure below to listen to music on this
unit with Bluetooth headphones.
Pairing this unit with Bluetooth headphones
Connecting to registered headphones
Playing music on this unit
For details about the operations of the Bluetooth
headphones, also refer to the operation manual supplied
with your Bluetooth headphones.
Pairing this unit with Bluetooth headphones
Pairing is an operation where Bluetooth devices register
with each other beforehand. Use the procedure below
to pair the unit with your Bluetooth headphones. Once
.
a pairing operation is performed, it does not need to be
performed again. If pairing is already completed, proceed
to "Playing music on this unit" on the back page.
1
Select a function other than the Bluetooth function.
on the unit for about 2
2
Place the Bluetooth headphones to be connected to
this unit within 1 meter of the unit.
on the remote.
3
Put the Bluetooth headphones in pairing mode.
For details about the operations of the Bluetooth
.
headphones, refer to the operation manual supplied
with your Bluetooth headphones.
4
Press and hold BLUETOOTH OPR
on the unit for
about 7 seconds until the BLUETOOTH indicator
flashes.
Sound output from the speakers is stopped.
5
Enter the passcode.
Follow the same procedure as in step 4 of "Pairing this
unit with a Bluetooth device" on this page.
Once pairing is completed and the connection is
established, the unit display changes as follows:
.
"LINKED" Name of the Bluetooth device
To cancel passcode entry partway
Press
.
Notes
"Passcode" may be called "Passkey", "PIN code", "PIN number" or
"Password", etc. depending on the device.
This unit only supports numerical passcodes up to 4 digits.
The pairing standby status of the unit is cancelled after about 30
seconds. If pairing is not successful, redo the procedure from step 1.
While connected to a Bluetooth device, this unit cannot be detected
and a connection cannot be established from another Bluetooth
device.
Pairing may not be possible if other Bluetooth devices are present
around the unit. In this case, turn off the other Bluetooth devices.
.
To erase all the pairing registration information
1
Press BLUETOOTH
.
When the unit is connected with a Bluetooth
while the Bluetooth device name
device (when the Bluetooth device name or other
information appears in the unit display), press and
hold BLUETOOTH OPR
on the unit for about 2
seconds to put the unit in Bluetooth standby mode.
2
Press CLEAR
on the remote.
on the unit for
"DELETE" appears.
3
Press ENTER
.
"COMPLETE" appears and all the pairing information
is erased.
Note
Press
To connect with Bluetooth headphones after performing this
operation, you must enter the passcode again.
.
.
Continued on back page
/
on the unit
(
/
on the remote)
.
Hold down
/
on the
unit (
/
on the remote)
.
is pressed while connected to