Sony ZS-BT1 - Boombox With Bluetooth Technology Instruções de utilização - Página 2
Procurar online ou descarregar pdf Instruções de utilização para Sistema estéreo Sony ZS-BT1 - Boombox With Bluetooth Technology. Sony ZS-BT1 - Boombox With Bluetooth Technology 2 páginas. Limited warranty (u.s. only)
Também para Sony ZS-BT1 - Boombox With Bluetooth Technology: Especificações (2 páginas), Manual (16 páginas), Garantia limitada (1 páginas)
Imprimir página
Basic Operations
Playing music on this unit
Effects of other devices
You can operate this unit from Bluetooth headphones
Bluetooth devices and wireless LAN (IEEE 802.11b/g)
by connecting the unit and Bluetooth headphones using
use the same frequency band (2.4 GHz). When using
AVRCP.
your Bluetooth device near a device with wireless LAN
capability, electromagnetic interference may occur.
1
Select a function other than the Bluetooth function.
This could result in lower data transfer rates, noise, or
2
Establish a connection with the Bluetooth
inability to connect. If this happens, try the following
headphones.
remedies:
Try connecting this unit and Bluetooth mobile phone
Press and hold BLUETOOTH OPR
on the unit for
or Bluetooth device when you are at least 10 meters
about 2 seconds until the BLUETOOTH indicator
away from the wireless LAN equipment.
lights up, then release the button.
Turn off the power to the wireless LAN equipment
If more than one Bluetooth device that has been
when using your Bluetooth device within 10 meters.
connected in the past is present around the unit, the
The radio waves broadcast by this unit may interfere
unit attempts to connect with up to 3 most recently
with the operation of some medical devices. Since this
connected devices. (Connection is attempted with up
interference may result in malfunction, always turn off
to 3 devices in order from the most recently connected
the power on this unit, Bluetooth mobile phone and
device, and the attempts end when a connection is
Bluetooth device in the following locations:
established.)
In hospitals, on trains, in airplanes, at gas stations,
Once the connection is established, the unit display
and any place where flammable gasses may be
changes as follows:
present
"LINKED" Name of the Bluetooth device
Near automatic doors or fire alarms
3
Start playback of the music for the function selected
Notes
in step 1.
This unit supports security functions that comply with the Bluetooth
Depending on the type of Bluetooth headphones, you
specification as a means of ensuring security during communication
can operate this unit (playback, volume control, etc.)
using Bluetooth technology. However, this security may be
insufficient depending on the setting contents and other factors, so
using the headphone's controls.
always be careful when performing communication using Bluetooth
For details about the operations of the Bluetooth
technology.
headphones, refer to the operation manual supplied
Sony cannot be held liable in any way for damages or other loss
with your Bluetooth headphones.
resulting from information leaks during communication using
Bluetooth technology.
4
Press VOLUME + or –
to adjust the volume.
Bluetooth communication is not necessarily guaranteed with all
Bluetooth devices that have the same profile as this unit.
To cancel the connection with Bluetooth
Bluetooth devices connected with this unit must comply with the
Bluetooth specification prescribed by the Bluetooth SIG, Inc., and
headphones
must be certified to comply. However, even when a device complies
Press and hold BLUETOOTH OPR
on the unit for
with the Bluetooth specification, there may be cases where the
about 2 seconds until the BLUETOOTH indicator
characteristics or specifications of the Bluetooth device make it
impossible to connect, or may result in different control methods,
turns off.
display or operation.
Notes
Noise may occur or the audio may cut off depending on the
Bluetooth device connected with this unit, the communications
If you cannot connect with paired Bluetooth headphones,
environment, or surrounding conditions.
perform the pairing operation between the unit and the Bluetooth
headphones again.
When the unit is changed to a function other than the Bluetooth
Playable Bluetooth devices
function and BLUETOOTH OPR
on the unit is pressed while
You can check the websites below for the Bluetooth
connected to a Bluetooth device, it may take some time until a
compatible devices.
connection is made with the Bluetooth headphones.
<http://www.sony.com/support>
This unit stores separate volume settings for when listening through
the speakers or (headphones) jack
on the unit, or when
listening through Bluetooth headphones.
Bluetooth wireless technology
Bluetooth wireless technology is a short-range wireless
technology linking digital devices, such as personal
computers and digital still cameras. Using the Bluetooth
wireless technology, you can operate the units involved
within a range of about 10 meters.
The Bluetooth wireless technology is commonly
used between two devices, but a single device can be
connected to multiple devices.
*
You do not need wires to get connected as you do with
a USB connection, and you do not need to place the
devices face to face as you do with wireless infrared
technology. You can use the technology with one
Bluetooth device in your bag or pocket.
Bluetooth wireless technology is a global standard
supported by thousands of companies. These companies
produce products that meet the global standard.
* This unit cannot be connected to multiple devices.
Supported Bluetooth version and profiles
Profile refers to a standard set of capabilities for various
Bluetooth product capabilities. This unit supports the
following Bluetooth version and profiles.
Supported Bluetooth version:
Bluetooth Standard version 2.0
Supported Bluetooth profiles:
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
Effective communication range
Bluetooth devices should be used within approximately
10 meters (unobstructed distance) of each other. The
effective communication range may become shorter
under the following conditions.
When a person, metal object, wall or other
obstruction is between the devices with a Bluetooth
connection
Locations where a wireless LAN is installed
Around microwave ovens that are in use
Locations where other electromagnetic waves occur
Other Operations
Using the display
Creating your own program
Play)
You can check information about the CD using the
display.
You can arrange the playing order of up to 20 tracks on
a CD.
To check the total track number and
1
Press CD
.
playing time of the CD
"CD" appears in the display.
Press
to stop the CD playback.
2
Press MODE
repeatedly until "PGM" flashes in the
display.
3
Press
or
(
remote)
then press ENTER
want to program in the order you want.
Total track number
Total playing time
To check the remaining time
Press DISPLAY
on the unit while playing a CD. The
Programed track number
display changes as follows:
Playing order
The current track number and playing time
4
Press
to start Program Play.
To cancel Program Play
The current track number and the remaining
time of the current track*
Stop playing first. Then press MODE
"PGM" disappears from the display.
The number of tracks left and the time
To delete the last track of the program
remaining on the CD
Press CLEAR
on the remote while the unit is stopped.
* For a track whose number is more than 20, the remaining time
appears as "− − : − −" in the display.
To check the order of tracks before play
Press ENTER
.
Every time you press the button, the track number
appears in the programed order.
Playing tracks repeatedly
To change the current program
(Repeat Play)
Press
once if the CD is stopped and twice if the
You can play tracks repeatedly in normal, Shuffle or
CD is playing. The current program will be erased.
Program play modes.
Then create a new program following the programing
1
procedure.
Press CD
.
"CD" appears in the display.
Tips
If you try to program 21 tracks or more, "FULL" will appear in the
2
Proceed as follows.
display.
You can play the same program again, since the program is saved
To repeat
Do this
until you open the CD tray or turn off the power of the unit.
A single track 1 Press REPEAT
until "
1" appears.
2 Press
or
(
or
on
the remote)
to select the track that you want
Presetting radio stations
to repeat.
3 Press
.
You can store radio stations into the unit's memory. You
All tracks on
1 Press REPEAT
repeatedly until "
"
can preset up to 30 radio stations, 20 for FM and 10 for
the CD
appears.
2 Press
.
AM in any order.
1 Press MODE repeatedly until "SHUF"
Tracks in
1
Press RADIO BAND
AUTO PRESET
random order
appears, and then press REPEAT
to show "
(RADIO
BAND
on the remote) repeatedly to
"
select the band.
2 Press
.
2
Hold down RADIO BAND
AUTO PRESET
Programed
1 Press MODE
repeatedly until "PGM"
tracks
appears, and then press REPEAT
to show
unit for 2 seconds until "AUTO" flashes in the display.
"
"
3
Press ENTER
while "AUTO" flashes in the display.
2 Program tracks (see step 3 of "Creating your
own program").
The stations are stored in memory from the lower
3 Press
.
frequencies to the higher ones.
If a station cannot be preset automatically
To cancel Repeat Play
You need to preset a station with a weak signal manually.
Press REPEAT
until " " disappears from the display.
1
Press RADIO BAND
AUTO PRESET
(RADIO
BAND
on the remote) repeatedly to
select the band.
Playing tracks in random order
(Shuffle
2
Tune in a station you want.
Play)
3
Hold down ENTER
on the unit repeatedly for
You can play tracks in random order.
2 seconds until the preset number flashes in the
display.
1
Press CD
.
4
Press PRESET + or –
on the unit repeatedly until
"CD" appears in the display.
the preset number you want for the station flashes
2
Press MODE
repeatedly until "SHUF" appears in
in the display.
the display.
5
Press ENTER
on the unit.
3
Press
to start Shuffle Play.
The new station replaces the old one.
To cancel Shuffle Play
Tip
Stop playing first. Then press MODE
repeatedly until
The preset radio stations remain in memory even if you unplug the
AC power cord or remove the batteries.
"SHUF" disappears from the display.
Tip
During Shuffle Play, you cannot select the previous track by pressing
(
on the remote)
.
Precautions
Discs that this unit CAN play
Playing preset radio stations
(Program
Audio CD
CD-R/CD-RW (CD-DA*)
1
Press RADIO BAND
AUTO PRESET
on the unit
* CD-DA is the abbreviation for Compact Disc Digital Audio. It is a
(RADIO
BAND
on the remote) to select the band.
recording standard used for Audio CDs.
2
Press PRESET + or –
on the unit (PRESET + or –
Discs that this unit CANNOT play
on the remote) to tune in the stored station.
CD-R/CD-RW other than those recorded in music CD
format
CD-R/CD-RW of poor recording quality, CD-R/CD-RW
Falling asleep to music
that has scratches or are dirty, or CD-R/CD-RW recorded
with an incompatible recording device
or
on the
1
CD-R/CD-RW which is finalized incorrectly
Play the music source you want.
for the tracks you
2
Press SLEEP
on the unit to display "SLEEP".
Notes on discs
3
Press SLEEP
on the unit to select the minutes
Before playing, clean the CD with a cleaning cloth.
Wipe the CD from the center out. If there is a scratch,
until the unit goes off automatically.
dirt or fingerprints on the CD, it may cause tracking
Each time you press the button, the indication changes
error.
as follows:
"AUTO*" "60MIN" "30MIN" "20MIN"
"10MIN" "OFF".
* When you select "AUTO", the CD stops playing in 90 minutes at
most and the unit goes off automatically. When you are listening
to the radio, the radio goes off in 90 minutes.
If 4 seconds have passed after you pressed SLEEP
,
repeatedly until
the minutes in the display are entered.
Do not use solvents such as benzine, thinner,
When the preset time has passed, the unit goes off
commercially available cleaners or anti-static spray
automatically.
intended for vinyl LPs.
To cancel the sleep function
Do not expose the CD to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in
Press POWER
to turn off the power.
direct sunlight as there can be a considerable rise in
Tip
temperature inside the car.
The display's backlight goes off while sleeping time is active.
Do not stick paper or sticker on the CD, nor scratch the
surface of the CD.
After playing, store the CD in its case.
Connecting optional component
On safety
You can enjoy the sound from a PC, TV, VCR, portable
As the laser beam used in the CD player section is
digital music player, etc. through the speakers of this unit.
harmful to the eyes, do not attempt to disassemble the
Be sure to turn off the power of each component before
casing. Refer servicing to qualified personnel only.
making any connections.
Should any solid object or liquid fall into the unit,
For details, refer to the instruction manual of the
unplug the unit, and have it checked by qualified
component to be connected.
personnel before operating it any further.
1
Connect the AUDIO IN jack on the unit to the
Discs with non-standard shapes (e.g., heart, square,
line output jack of the portable digital music player
star) cannot be played on this unit. Attempting to do so
or other components using an audio connecting
may damage the unit. Do not use such discs.
cable* (not supplied).
On power sources
* For a PC: use a cable which fills the connector of your PC.
For a TV or VCR: use a cable with a stereo-mini plug on one
For AC operation, use the supplied AC power cord; do
end and two phono plugs on the other end.
not use any other type.
For a portable digital music player: use a cable with a stereo-
mini plug on both ends.
The unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet,
2
Turn the unit and the connected component on.
even if the unit itself has been turned off.
on the unit
3
Press AUDIO IN and start playing sound on the
Unplug the unit from the wall outlet when it is not used
connected component.
for an extended period of time.
The sound from the connected component is output
When the batteries are not to be used, remove them to
on the
from the speakers.
avoid damage that can be caused by battery leakage or
corrosion.
The nameplate indicating operating voltage, power
consumption, etc. is located at the bottom.
On placement
Do not leave the unit in a location near heat sources,
in a place subject to direct sunlight, excessive dust or
mechanical shock or in a car subject to the direct rays
on the unit
of the sun.
Do not place the unit on an inclined or unstable place.
Do not place anything within 10 mm of the side of the
cabinet. The ventilation holes must be unobstructed for
the unit to operate properly and prolong the life of its
components.
Since a strong magnet is used for the speakers, keep
personal credit cards using magnetic coding or spring-
wound watches away from the unit to prevent possible
damage from the magnet.
On operation
If the unit is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may condense on the lens inside the CD player section.
Should this occur, the unit will not operate properly. In
this case, remove the CD and wait about an hour for the
moisture to evaporate.
Cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder, or
solvent, such as alcohol or benzine.
If you have any questions or problems concerning your
unit, please consult your nearest Sony dealer.
Severe hum or noise
Troubleshooting
If there are obstacles between the unit and your
Bluetooth device, remove or avoid the obstacles.
If there is equipment that generates electromagnetic
radiation, such as a wireless LAN, other Bluetooth
General
device, or a microwave oven nearby, move them away.
Turn down the volume of the connected Bluetooth
The power is not on.
device.
Connect the AC power cord to the wall outlet securely.
Make sure the batteries are inserted correctly.
The sound from the Bluetooth headphones is
distorted.
Replace all the batteries with new ones if they are weak.
You cannot turn on the unit with the remote when you
Turn down the volume of the unit using VOLUME
operate the unit on batteries.
–
. If your headphones have a volume control,
also adjust the volume using the headphone's volume
There is no audio.
control.
Make sure the function you want to use appears in the
Press SOUND
repeatedly to select "
display window.
Remote
Unplug the headphones when listening through
speakers.
The remote does not function.
Noise is heard.
Replace all the batteries in the remote with new ones if
Someone is using a portable telephone or other
they are weak.
equipment that emits radio waves near the unit.
Make sure that you are pointing the remote at the
Move the portable telephone, etc., away from the
remote sensor on the unit.
unit.
Remove any obstacles in the path of the remote and the
CD player
unit.
Make sure the remote sensor is not exposed to strong
light such as direct sunlight or fluorescent lamp light.
The CD does not play or "NO DISC" is displayed
Move closer to the unit when using the remote.
even when a CD is in place.
Place the CD with the label surface up.
To reset the unit to factory settings
Clean the CD.
If the unit still does not operate properly, reset the unit to
Take out the CD and leave the CD tray open for about
factory settings.
an hour to dry moisture condensation.
Use buttons on the unit to reset the unit to its factory
The CD-R/CD-RW is blank.
default settings.
There is a problem with the quality of the CD-R/
1
Remove all the batteries from the unit.
CD-RW, recording device or application software.
2
Disconnect and reconnect the power cord, and then
Replace all the batteries with new ones if they are weak.
turn on the unit.
The sound drops out.
3
Press
, ENTER
and POWER
Reduce the volume.
the same time.
Clean the CD, or replace it if the CD is badly damaged.
All user-configured settings, such as preset radio
Place the unit in a location free from vibration.
stations, are deleted.
Clean the lens with a commercially available blower.
After trying the remedies, if the problem persists, please
The sound may drop out or noise may be heard when
using poor quality CD-R/CD-RW or if there is a
consult your nearest Sony dealer.
problem with the recording device or application
software.
Messages
Radio
Reception is poor.
Bluetooth device
Reorient the antenna to improve FM reception.
LINKED: Bluetooth communication was established.
UNLINKED: Communication with a Bluetooth
device was cut off for some reason, or Bluetooth
communication was ended.
NO DEVICE: A pairable Bluetooth device was not found,
or connection was not possible.
NOT USED: The unit is not connected with a Bluetooth
device using AVRCP.
PIN: The unit is asking for the passcode. For details, see
Reorient the unit itself to improve AM reception.
"Using the Bluetooth function" on the front page.
PLEASE WAIT: The unit is readying for usage of a
Bluetooth device.
The audio is weak or has poor quality.
Replace all the batteries with new ones if they are weak.
Move the unit away from the TV.
If you are using the remote while listening to AM radio,
noise may be heard.
The picture of your TV becomes unstable.
If you are listening to an FM program near the TV with
an indoor antenna, move the unit away from the TV.
Bluetooth device
Pairing cannot be done.
Move the Bluetooth device closer to the unit.
Pairing may not be possible if other Bluetooth devices
are present around the unit. In this case, turn off the
other Bluetooth devices.
Connection is not possible.
The Bluetooth device you attempted to connect does
not support the A2DP and AVRCP profiles, and cannot
be connected with the unit.
Enable the Bluetooth function of the Bluetooth device.
The pairing registration information has been erased.
Perform the pairing operation again.
While connected to a Bluetooth device, this unit cannot
be detected and a connection cannot be established
from another Bluetooth device.
The sound skips or fluctuates, or the
connection is lost.
The unit and the Bluetooth device are too far apart.
If there are obstacles between the unit and your
Bluetooth device, remove or avoid the obstacles.
If there is equipment that generates electromagnetic
radiation, such as a wireless LAN, other Bluetooth
device, or a microwave oven nearby, move them away.
The sound of your Bluetooth device cannot be
heard on this unit.
Turn up the volume on your Bluetooth device first, and
then adjust the volume using VOLUME + or –
.
".
on the unit at