Digitone Call Blocker Manual do Proprietário - Página 7

Procurar online ou descarregar pdf Manual do Proprietário para Acessórios para telefones Digitone Call Blocker. Digitone Call Blocker 13 páginas. Automatically blocks and routes screened calls with caller id
Também para Digitone Call Blocker: Lista de códigos (2 páginas)

Imprimir página

Programming Numbers - Invited, VIP and Blocked (con't)

Inviting Individual Callers and Code 97 # * - "I want to Block all callers and just allow one or more

numbers". Note from the factory, all callers with a number displayed are already invited and can

ring through, but you can create your own caller list by disabling the Global Invited list first. You can

then program in preferred Invited callers using the Program Button on the front panel. To enable this

feature, press and hold the Program Button for 3 seconds until you see "Program Mode", then "Pick Up

Phone", when the prompt for "Enter Code" displays enter Code 97 #*, display shows function. NOTE:

that when Code 97 #* is stored, all calls will be Blocked, answered and hungup on until you add

Invited numbers. When the prompt for "Enter Code" displays again, enter Code 50 to store a 10 digit

number (11 digits for Canada or Vonage), then the * key. Example for individual numbers enter: Code

50, 602 555 1212 *, display shows function. Store up to 30 numbers including area codes.

Caller List Deletion

WARNING: This will delete all numbers from all lists! To delete ALL numbers stored, enter

programming: press and hold the Program Button for 3 seconds until you see "Program Mode", then

"Pick Up Phone", when the prompt for "Enter Code" displays, enter Code 98 # *, display shows: "ALL

NBR DELETED". All numbers stored from all lists will be cleared.

Operating Modes

You can switch between the operating modes using the programming button and by entering one of the

mode numbers. The Call Blocker can toggle between the modes Standard, Business or Standby using

one of the settings. Note: After Hours Mode runs together with only Standard or Business Mode when

either mode is enabled. Mode settings are displayed only when entering Programming Mode.

Standard (default) Mode = Code 30

When calls come in, all phone numbers that are Invited will ring phones throughout your home/office like

normal and to the TEL phone port on the back of the Call Blocker, except for Anonymous, Out Of

Area, Private and Unknown callers showing no phone number. These calls will be answered by the

Call Blocker for processing and by default be hung-up on unless program Code 72 is enabled to allow

these call types to ring in. Blocked callers will be immediately answered and after eight seconds, get

hung-up on. To enable this (default) Mode, press and hold the Program Button for 3 seconds until you

see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays enter code 30,

display shows function. You can use Code 76 to override the block function for Out of Area + no number

call types or Code 74 to override the block function for Private + no number call types. These two codes

will allow those callers you need to hear from Out of Area (overseas) or Private (neighbors) to ring

through. You can also use Code 52 to invite up to 10 callers within a blocked area code.

Business Mode = Code 31

If you are running a business and want to hear from Anonymous, Out Of Area, Private and Unknown

callers as well as any other type of call, you can enable Business Mode Code 31 to allow calls through to

the TEL phone port except those you want to block. This mode also works with your phone company's

voice mail but also blocks those phone numbers you have entered into the Blocked Callers List. Blocked

callers will be immediately answered and after eight seconds get hung-up on. To enable this Mode,

press and hold the Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone",

when the prompt for "Enter Code" displays enter code 31, display shows function.

Standby Mode = Code 32

In Standby, the TEL phone port will be connected directly to the telephone line and phones connected

there will ring. This feature allows you to leave the Call Blocker off whenever you like without

disconnecting the device and the RED light will blink slowly. To enable this Mode, press and hold the

Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for

"Enter Code" displays enter code 32, display shows function.