ACU-RITE SENC 150 Manual de instalação - Página 4
Procurar online ou descarregar pdf Manual de instalação para Conversor de multimédia ACU-RITE SENC 150. ACU-RITE SENC 150 8 páginas. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
Também para ACU-RITE SENC 150: Manual de referência (20 páginas), Manual de instalação (4 páginas), Manual de instalação (6 páginas), Manual de instruções (12 páginas)
Imprimir páginaSENC 150
Table
Saddle
•
Attach the reading head bracket to the saddle, and
align the bracket tapped holes to the reading head
mounting holes.
•
Secure the bracket in place.
Leveling screw adjustment ...
*Leveling set screw
(3)
Gap
•
A gap will exist between the reading head and the
bracket.
•
Insert the two *8-32 x 5/8" SHCS. Insure the bracket
is adjusted to provide proper screw head clearance.
Do Not Tighten Screws at this time.
•
Set each leveling set screw by placing a .001" - .003"
feeler gage between the set screw and the bracket.
•
Adjust each set screw until a slight drag is felt on the
feeler gage.
•
Evenly tighten the two 8-32 SHCS.
Installation Manual 385072-38
Reading head bracket
1/4-20 x 3/4" BHCS
and flat washer (.09 thk)
* 8-32 x 5/8" SHCS (2)
Acu-Rite Companies Inc.
One Precision Way • Jamestown, NY 14701
4
Encoder Installation Manual For: Vertical Knee Mill
Longitudinal X Axis on Rear of Table
Encoder button up ...
Slide brackets back
away from the
reading head and
cable
•
Use allen wrench from set screw adjustment to slide
alignment brackets away from the reading head.
•
Remove alignment brackets and save.
•
Move the axis through its full travel. Confirm that
the assembly does not interfere with the machine
movement.
Proceed with the Cross
Feed installation
Twist brackets
45° to remove
P.N. 385072-208 Ed B 2/06