Cisco UBR7246VXR Manual de início rápido - Página 10
Procurar online ou descarregar pdf Manual de início rápido para Hardware de rede Cisco UBR7246VXR. Cisco UBR7246VXR 27 páginas. Universal broadband router
Também para Cisco UBR7246VXR: Manual do utilizador (7 páginas), Manual de instalação (28 páginas), Instalação de hardware (25 páginas)
Imprimir página
Figure 5
Installing the Rack-Mount Brackets so the Front of the Chassis Is Flush with the Rack
Rack-mount bracket
You cannot use the cable management bracket in this configuration.
Note
Figure 6
Installing the Rack-Mount Brackets so the Front of the Chassis Protrudes Out of the Rack
Rack-mount bracket
Attach the Rack-Mount Brackets to the Middle of the Chassis
To install the rack-mount brackets for an open or relay-type rack-mount configurations, complete the following steps:
Locate the threaded holes in the middle sides of the chassis.
Step 1
Align the first rack-mount bracket to the threaded holes in the right side of the chassis, as shown in Figure 7. Use either
Step 2
set of four holes to align the bracket to the threaded holes in the sides of the chassis.
Thread the four M4 x 6-mm Phillips flathead screws through the rack-mount bracket and into the side of the chassis.
Step 3
Use a number 2 Phillips screwdriver to tighten the screws.
Step 4
Repeat Step 1 through Step 3 to attach the other rack-mount bracket.
Step 5
See the "Installing the Cable-Management Brackets" section on page 11 for cable management bracket instructions.
10
Rack-mount bracket
Rack-mount bracket