Cisco UCS B200 M3 Manual de instalação - Página 23

Procurar online ou descarregar pdf Manual de instalação para Hardware de rede Cisco UCS B200 M3. Cisco UCS B200 M3 34 páginas. Blade server
Também para Cisco UCS B200 M3: Nota de instalação e manutenção (36 páginas), Nota de instalação e manutenção (37 páginas), Manual (8 páginas), Upgrade Manual (21 páginas), Nota de instalação e manutenção (28 páginas)

Procedure

Step 1

Open both DIMM connector latches.

Figure 18: Installing DIMMs in the Blade Server

Step 2

Press the DIMM into its slot evenly on both ends until it clicks into place.

DIMMs are keyed, if a gentle force is not sufficient, make sure the notch on the DIMM is correctly aligned.

Note

Be sure that the notch in the DIMM aligns with the slot. If the notch is misaligned you may damage the DIMM,

the slot, or both.

Step 3

Press the DIMM connector latches inward slightly to seat them fully.

Supported DIMMs

The DIMMs supported in this blade server are constantly being updated. A list of currently supported and available drives is in the

specification sheets at:

http://www.cisco.com/en/US/products/ps10280/products_data_sheets_list.html

Cisco does not support third-party memory DIMMs, and in some cases their use may irreparably damage the server and require an

RMA and down time.