Cisco UCS B200 M3 Kurulum Kılavuzu - Sayfa 23

Ağ Donanımı Cisco UCS B200 M3 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Cisco UCS B200 M3 34 sayfaları. Blade server
Ayrıca Cisco UCS B200 M3 için: Kurulum ve Servis Notu (36 sayfalar), Kurulum ve Servis Notu (37 sayfalar), Manuel (8 sayfalar), Yükseltme Kılavuzu (21 sayfalar), Kurulum ve Servis Notu (28 sayfalar)

Procedure

Step 1

Open both DIMM connector latches.

Figure 18: Installing DIMMs in the Blade Server

Step 2

Press the DIMM into its slot evenly on both ends until it clicks into place.

DIMMs are keyed, if a gentle force is not sufficient, make sure the notch on the DIMM is correctly aligned.

Note

Be sure that the notch in the DIMM aligns with the slot. If the notch is misaligned you may damage the DIMM,

the slot, or both.

Step 3

Press the DIMM connector latches inward slightly to seat them fully.

Supported DIMMs

The DIMMs supported in this blade server are constantly being updated. A list of currently supported and available drives is in the

specification sheets at:

http://www.cisco.com/en/US/products/ps10280/products_data_sheets_list.html

Cisco does not support third-party memory DIMMs, and in some cases their use may irreparably damage the server and require an

RMA and down time.