Cisco Nexus 7000 Series Manual de instruções de instalação - Página 3

Procurar online ou descarregar pdf Manual de instruções de instalação para Servidor Cisco Nexus 7000 Series. Cisco Nexus 7000 Series 39 páginas. Switch chassis
Também para Cisco Nexus 7000 Series: Manual de referência (2 páginas), Referência (34 páginas), Manual de instalação (18 páginas), Configuração (8 páginas), Manual de configuração (28 páginas), Manual de início rápido (10 páginas), Manual de início rápido (29 páginas), Manual de instruções de substituição (14 páginas), Manual de instruções de substituição (21 páginas), Manual de instalação (16 páginas), Manual de resolução de problemas (10 páginas)

Rack-Mount Installation Summary

Following is a summary of the installation procedures required to rack-mount the chassis. This

summary is informational and is not intended to replace the actual procedures required to

rack-mount the chassis.

Following is a summary of procedures:

Read the section "Prerequisites" starting on page 7.

Verify that all mounting kit hardware is available.

Install the brackets on the rack posts.

Attach the spanner bars between the brackets.

Attach the chassis ears to the chassis.

Install the chassis in the rack.

Throughout these installation procedures, refer to Figure 2, Figure 3, and Figure 4, in addition to the

illustrations provided in the speciﬁc installation sections.

The mounting kit comprises two brackets, two chassis ears (each holds two captive grommets), and

fasteners (screws). The brackets and ears are identical. On each bracket, the inner side has a turned

ledge at the bottom to support the chassis, and shielding to provide electrical isolation between the

chassis and the rack. At the front of each bracket is a ﬂange with ﬁve mounting holes at the top and

three at the bottom.

Each of the two brackets mounts to a rack post with three 10-32 x 5/8-inch, Phillips pan-head

screws, which are provided. The front of each bracket attaches to the front of the rack post, and the

remainder of the bracket cantilevers off the post. At the bottom of each bracket, a ledge provides a

shelf for the bottom sides of the chassis.

A spanner bar on each bracket hooks into the opposite bracket to maintain an exact distance between

the two brackets at both the ends attached to the rack posts and unattached ends. The spanner bars

prevent the two brackets from separating. (See Figure 11 on page 19.)

Cisco 7000 and Cisco 7507 Rack-Mount Kit Installation Instructions

Rack-Mount Kit Overview