Digitus 4-CHANNEL SATA II Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Placa PCI Digitus 4-CHANNEL SATA II. Digitus 4-CHANNEL SATA II 12 páginas. 4-channel sata ii pci express card
Imprimir página
controller that supports up to four Serial ATA hard disk drives.
1.
Install your hard disk drive(s) in chassis.
2.
Connect the Serial ATA hard disk drive to the system power
supply using the included Serial ATA power cable.
3.
Connect one end of the Serial ATA cable to the hard disk drive.
4.
Attach the other end of the Serial ATA cable to the Serial ATA
controller on the PCIe SATA II 300 4-Channel Adapter.
5.
Follow the same instructions to connect up to four hard drives.
Device connection is now complete.
6.
Replace the computer cover and reconnect the power cord.
Driver Installation
For Windows® 2000
For A New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents of
the "
DS-30104\2K_XP_2003_Vista" folder, found on the driver CD,
onto a blank floppy disk then follow the directions below.
1.
Follow Windows® 2000 installation procedure.
2.
Restart the computer when prompted by the installation.
5