Digitus DS-30221-1 Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Placa PCI Digitus DS-30221-1. Digitus DS-30221-1 3 páginas. Usb 3.0, 4-port pci express add-on
Imprimir página
Hardware Installation
1. Turn Off the power to your computer.
2. Unplug the power cord and remove your computer's cover.
3. Remove the slot bracket from an available PCIe slot.
4. To install the card, carefully align the card's bus connector with the
selected PCIe slot on the motherboard. Push the board down
firmly.
5. Replace the slot bracket's holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
Driver Installation
For Windows
1. Please insert the CD driver bound with USB 3.0 4-Port PCI
Express Card into your CD-ROM Drive.
2. Follow the on-screen instructions to complete the installation.
To Verify Driver Installation
Click on the "Device Manager" tab in System Properties, which you
access from the Windows Control Panel. You should see a "VIA USB
3.0 Root Hub" and a "VIA USB eXtensible Host Controller" under
the "Universal Serial Bus controllers" item.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping
content. If the Declaration of Conformity is missing, you can request it by post under the below
mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
®
XP/Vista/Win7/8/10 (32/64 bit)