Digitus DS-30221-1 Kullanıcı Kılavuzu - Sayfa 3

PCI Kart Digitus DS-30221-1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Digitus DS-30221-1 3 sayfaları. Usb 3.0, 4-port pci express add-on

Sayfayı Yazdır

Hardware Installation

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computer's cover.

3. Remove the slot bracket from an available PCIe slot.

4. To install the card, carefully align the card's bus connector with the

selected PCIe slot on the motherboard. Push the board down

firmly.

5. Replace the slot bracket's holding screw to secure the card.

6. Replace the computer cover and reconnect the power cord.

Driver Installation

For Windows

1. Please insert the CD driver bound with USB 3.0 4-Port PCI

Express Card into your CD-ROM Drive.

2. Follow the on-screen instructions to complete the installation.

To Verify Driver Installation

Click on the "Device Manager" tab in System Properties, which you

access from the Windows Control Panel. You should see a "VIA USB

3.0 Root Hub" and a "VIA USB eXtensible Host Controller" under

the "Universal Serial Bus controllers" item.

Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping

content. If the Declaration of Conformity is missing, you can request it by post under the below

mentioned manufacturer address.

www.assmann.com

Assmann Electronic GmbH

Auf dem Schüffel 3

58513 Lüdenscheid

Germany

XP/Vista/Win7/8/10 (32/64 bit)