Cisco UCS B200 M4 Manual de manutenção - Página 4

Procurar online ou descarregar pdf Manual de manutenção para Servidor Cisco UCS B200 M4. Cisco UCS B200 M4 24 páginas. For e5-2600 v4 series cpus
Também para Cisco UCS B200 M4: Nota de instalação e manutenção (30 páginas), Nota de instalação e manutenção (46 páginas), Upgrade Manual (9 páginas)

Removing a Blade Server Cover

Step 10

Configure one or more of the following boot options for the boot policy and set their boot order:

• Local Devices boot—To boot from local devices, such as local disks on the server, virtual media, or

• SAN boot—To boot from an operating system image on the SAN, continue with Configuring a SAN

You can specify a primary and a secondary SAN boot. If the primary boot fails, the server attempts to boot

from the secondary.

• LAN boot—To boot from a centralized provisioning server, continue with Configuring a LAN Boot For

• iSCSI boot—To boot from an iSCSI LUN, continue with Creating an iSCSI Boot Policy in the

Removing a Blade Server Cover

Procedure

Step 1

Press and hold the button down as shown in the figure below.

Step 2

While holding the back end of the cover, pull the cover back and then up.

Figure 2: Opening a Cisco UCS B200 M4 Blade Server

Servicing a Blade Server

remote virtual disks, continue with Configuring a Local Disk Boot for a Boot Policy in the

Manager Server Management Guide

Boot for a Boot Policy in the

a Boot Policy in the

Cisco UCS Manager Server Management Guide

UCS Manager Server Management Guide

for your release.

Cisco UCS Manager Server Management Guide

for your release.

Servicing a Blade Server

Cisco UCS

for your release.

Cisco