Cisco Firepower 2600 Manual de instalação do hardware - Página 43

Procurar online ou descarregar pdf Manual de instalação do hardware para Porta de entrada Cisco Firepower 2600. Cisco Firepower 2600 44 páginas.

Maintenance and Upgrade

Trouble

Power supply health monitoring notifies you if the power supply loses power or malfunctions so that redundancy

is lost. Check the power supply cables to make sure they are functioning. If they are and errors are still

occurring, replace the power supply.

Before you begin

Take note of the following warnings:

Warning

Statement 1018—Supply Circuit

To reduce risk of electric shock and fire, take care when connecting units to the supply circuit so that wiring

is not overloaded.

Warning

Statement 1019—Main Disconnecting Device

The plug-socket combination must be accessible at all times, because it serves as the main disconnecting

device.

Warning

Statement 1024—Ground Conductor

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence

of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician

if you are uncertain that suitable grounding is available.

Warning

Statement 1030—Equipment Installation

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Warning

Statement 1073—No User-Serviceable Parts

No serviceable parts inside. To avoid risk of electric shock, do not open.

Warning

Statement 1074—Comply with Local and National Electrical Codes

To reduce risk of electric shock or fire, installation of the equipment must comply with local and national

electrical codes.

Step 1

Remove the power supply:

Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide

Remove and Replace a Power Supply