Cisco IOS Router Manual de iniciação - Página 10

Procurar online ou descarregar pdf Manual de iniciação para Porta de entrada Cisco IOS Router. Cisco IOS Router 12 páginas. Siemens hipath 4000 release 1 and siemens hicom 330e release 3.1 to cisco ios voice gateway using e1 qsig with h.323
Também para Cisco IOS Router: Informações sobre o produto (11 páginas), Nota de aplicação (41 páginas)

Imprimir página

Here is another example to enable all signatures belonging to signature Cisco IOS IPS basic

category.

training#configure terminal

Enter configuration commands, one per line.

training(config)#ip ips signature-category

training(config-ips-category)# category ios_ips basic

training(config-ips-category-action)#enabled true

training(config-ips-category-action)#exit

training(config-ips-category)#exit

Do you want to accept these changes? [confirm]y

Additional Commands and References

Cisco IOS IPS Configuration Guide:

http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186a0080747eb0.html

7 Retire/Unretire Signatures

You can use the Cisco IOS Software CLI to retire or unretire one signature or a group of

signatures based on signature categories.

Retiring a signature means Cisco IOS IPS will not compile that signature into memory for

scanning. Unretiring a signature instructs Cisco IOS IPS to compile the signature into memory and

use the signature to scan traffic.

Following are sample CLI commands to retire signature 6130/10.

training#configure terminal

Enter configuration commands, one per line.

training(config)#ip ips signature-definition

training(config-sigdef)#signature 6130 10

training(config-sigdef-sig)#status

training(config-sigdef-sig-status)#retired true

training(config-sigdef-sig-status)#exit

training(config-sigdef-sig)#exit

training(config-sigdef)#exit

Do you want to accept these changes? [confirm]y

training(config)#

White Paper

End with CNTL/Z

End with CNTL/Z.

Page 10 of 12