Cisco RF Gateway 10 Manual de início rápido - Página 10

Procurar online ou descarregar pdf Manual de início rápido para Porta de entrada Cisco RF Gateway 10. Cisco RF Gateway 10 41 páginas. Cisco systems rf gateway quick start guide

Step 1
Locate the threaded holes on the front sides of the chassis that align with the holes in the rack-mount bracket. Ensure
that you hold the front rack-mount bracket with the ear and holes facing outward and towards the front of the chassis
(see Figure 5).
Step 2
Install all six M5 undercut flat head screws (provided in the accessory kit) to secure each of the rack-mounting bracket
to the chassis. Three screws are installed on each end of the rack-mounting bracket.
Repeat Step 1 through Step 2 on the other side of the chassis.
Step 3
Install the chassis in the rack. To install the Cisco RFGW-10 UEQAM in the rack, go to Installing the Cisco RFGW-10
Step 4
UEQAM in a Rack, page 11.
Figure 5
Attaching the Front Rack-mount Brackets
1
1
Front rack-mount bracket
2
Cisco RFGW-10 UEQAM Chassis

Chassis Mid-Mounted Rack-Mount Bracket Installation

If you are rack-mounting the chassis using a mid-mounted configuration, then it provides for the chassis being recessed in the
rack or installed in a two-post rack.
Chassis installation handles cannot be installed if the chassis is to be mid-mounted.
Note
10
2
3
Front rack-mount bracket screws
3
1