Cisco RF Gateway 10 Hızlı Başlangıç Kılavuzu - Sayfa 10

Ağ Geçidi Cisco RF Gateway 10 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco RF Gateway 10 41 sayfaları. Cisco systems rf gateway quick start guide

Sayfayı Yazdır

Step 1

Locate the threaded holes on the front sides of the chassis that align with the holes in the rack-mount bracket. Ensure

that you hold the front rack-mount bracket with the ear and holes facing outward and towards the front of the chassis

(see Figure 5).

Step 2

Install all six M5 undercut flat head screws (provided in the accessory kit) to secure each of the rack-mounting bracket

to the chassis. Three screws are installed on each end of the rack-mounting bracket.

Repeat Step 1 through Step 2 on the other side of the chassis.

Step 3

Install the chassis in the rack. To install the Cisco RFGW-10 UEQAM in the rack, go to Installing the Cisco RFGW-10

Step 4

UEQAM in a Rack, page 11.

Figure 5

Attaching the Front Rack-mount Brackets

Front rack-mount bracket

Cisco RFGW-10 UEQAM Chassis

Chassis Mid-Mounted Rack-Mount Bracket Installation

If you are rack-mounting the chassis using a mid-mounted configuration, then it provides for the chassis being recessed in the

rack or installed in a two-post rack.

Chassis installation handles cannot be installed if the chassis is to be mid-mounted.

Note

Front rack-mount bracket screws