Epson TM-H6000IIIP Manual de desenvolvimento - Página 5
Procurar online ou descarregar pdf Manual de desenvolvimento para Scanner Epson TM-H6000IIIP. Epson TM-H6000IIIP 26 páginas.
Também para Epson TM-H6000IIIP: Manual de desenvolvimento (45 páginas), Manual de desenvolvimento (32 páginas)
Imprimir página
Section 2. Details on Settings
This section describes connection configurations and how to make the settings for the
TM-H6000III printer.
2.1 References of Firmware Versions
Please refer to the release notes (Relnote.txt).
2.2 Settings of DIP Switches
Confirm that the following settings have been made correctly.
1) Serial port
DIP-SW1
No.
Setting
1
2
3
4
5
6
7
8
It is possible to change the settings of DIP-SW1-1 and DIP-SW1-2, but it is
recommended to leave them OFF.
Set DIP-SW1-3 (Handshake) to DTR/DSR.
Set DIP-SW1-4 (Bit length) to 8 bits.
Set DIP-SW1-5 to DIP-SW1-8 accordance with the port information.
The described set values are the default values. For the details, please refer to
the product manual of the POSPrinter. Also, if these settings are changed, make
sure to change the port information using the SetupPOS utility.
Set DIP-SW2-2 in accordance with whether or not a customer display is
connected.
If connected, set to ON. If not, set to OFF.
OFF
Recommended
OFF
Recommended
OFF
Fixed at OFF
OFF
Fixed at OFF
OFF
Settable
OFF
Settable
ON
Settable
OFF
Settable
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-H6000III)
DIP-SW2
No.
Setting
1
OFF
2
OFF
3
OFF
4
OFF
5
OFF
6
OFF
7
OFF
8
OFF
2
Version 3.00 Feb. 2019
Settable
Settable
Settable
Settable
Fixed at OFF
Fixed at OFF
Fixed at OFF
Fixed at OFF