ECKELMANN LICANYKAB Manual de Instruções - Página 7

Procurar online ou descarregar pdf Manual de Instruções para Adaptador ECKELMANN LICANYKAB. ECKELMANN LICANYKAB 12 páginas. Can bus-pc adapter

LAN Gateway Firmware V1.1c

3. Connect the CAN bus cable to the COMBICON plug (see table 3.1-1 / picture 3.1-2).

Picture 3.1-2: Wire assignment for the connection of the COMBICON plug to the CAN bus (pictured without

through looping)

For safe operation it is sufficient to connect the signals CAN-low, CAN-high and

CAN-GND to the Sub-Min-D plug.

The additional use of the CAN-SHLD in the Sub-Min-D plug can cause problems as

the E•LDS system's CAN bus uses CAN-SHLD and CAN-GND differently, although

these signals are connected internally within the adapter!

Incorrect shielding can lead to electromagnetic noise fields. During wiring work, it is

essential that the conductors be connected by a professional and correctly shielded.

If the CAN bus to PC adapter is not positioned at the end of the CAN bus, then the

cable must be looped through from the Sub-Min-D plug.

The terminating resistor in picture 3.1-1 is obsolete and is to be attached to the end

of the CAN bus (on the last node).

V1.2

03. May 2010

7/12