Toshiba 219X6M Manual do Proprietário - Página 2

Procurar online ou descarregar pdf Manual do Proprietário para TV Toshiba 219X6M. Toshiba 219X6M 13 páginas. Colour television ~11-sys tem

WELCOME

TO THE BRIGHT

NEW WORLD

TOSHIBA

COLOUR

Your new, precision-built Toshiba Colour Television receiver has been designed and engineered by the world's largest maker of

IC's, transistors and diodes to give you the most dependable, most natural colour television reception possible today.

IMPORTANT

To enjoy your set to the full from the very beginning, read this handbook carefully and keep it handy for ready reference.

This set allows you to receive 11 systems, namely, PAL B/G, SECAM

B/G, PAL D/K, SECAM D/K, PAL !, NTSC Standard

(US M, JAPAN

M), NTSC 3.58/5.5 (VTR Play Back), NTSC 4.43/5.5 (VTR Play Back), PAL 50/60 Hz (VIDEO DISK Play

Back), SECAM 50/60 Hz (VIDEO DISK Play Back) and NTSC 50/60 Hz (VIDEO DISK Play Back).

INSTALLATION

@ LOCATE the receiver in the room where direct light does not strike the screen.

Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for

comfortable viewing.

@ POWER CONSUMPTION

of 219X6M is 100 watts and 289X6M is 152 watts at AC 220 volts/50 Hz.

m Automatic Degaussing:

All colour

television receivers are sensitive to magnetic influences, usually caused by either

moving the receiver from one place to another or using certain electrical appliances near the receiver. This residual magnet-

ism as it is called, sometimes causes distortion which gives rise to 'blotchy' areas of colour in the picture. To avoid these

effects the receiver incorporates an automatic degaussing circuit which operates for a short while immediately each time

the receiver is switched on using the mains switch. This circuit removes any residual magnetism in the metal parts of the

picture tube and therefore ensures that each time the receiver is switched "ON" using the Mains switch, the purity of the

colours

displayed

on the screen remain true and lifelike. If the set is moved

or faced in a different direction, the mains

switch must be switched off at least ONE hour in order that the automatic degaussing circuit operates properly.