Pioneer AVX-7300 Manual de instalação - Página 2
Procurar online ou descarregar pdf Manual de instalação para Recetor para automóvel Pioneer AVX-7300. Pioneer AVX-7300 6 páginas. Pioneer avx-7300 car audio video system
Também para Pioneer AVX-7300: Manual de operação (28 páginas), Manual de instalação (14 páginas), Manual de instalação (6 páginas)
Imprimir página
Connecting the Units
When Connecting the Multi-Channel AV Master Unit
AV cable
(supplied with the Multi-
RGB cable
Multi-Channel AV
Channel AV Master Unit)
(supplied with the Multi-
Master Unit (e.g. AVM-P9000R)
Channel AV Master Unit)
(sold separately)
Red
Gray
Green
Red (Right)
White (Left)
Yellow
Blue
Yellow
Blue
Red
(DVD VIDEO IN)
Yellow/black
Gray
To Yellow/black lead
(GUIDE ON)
Optical cable
on the navigation unit.
(supplied with the Multi-
Channel AV Master Unit)
Green
IP-BUS cable
IP-BUS
(supplied with the Multi-Channel
AV Master Unit)
RCA cable (supplied with
the DVD player)
Connection box
(supplied with the DVD
Navigation Unit)
Green
DVD Navigation Unit
(e.g. AVIC-9DVD)
(sold separately)
To video output
To audio outputs
Voice guidance speaker
RCA cables (sold separately)
(supplied)
This product
40 cm
Black
DVD player
(e.g. SDV-P7)
STAND ALONE
(sold separately)
Yellow (front
video output)
Not used.
Blue
Red
20 pin cable
3 m
(supplied)
When Connecting the Navigation Unit
To audio inputs of car stereo
To audio outputs
RCA cable
(sold separately)
Green
3 m
Red
Normally, connection is not
necessary.
If the DVD player (e.g. SDV-
P7) is installed in a location
that prevents reception of the
remote control signal, connect
with a separately sold AV-BUS
extension cable. (Or connect a
separately sold remote sensor
to the DVD player.)
3 m
Fig. 3
<ENGLISH>
Installation
Note:
• Before finally installing the unit, connect the
wiring temporarily, making sure it is all connected
up properly, and the unit and the system work
properly.
• Use only the parts included with the unit to ensure
proper installation. The use of unauthorized parts
can cause malfunctions.
• Consult with your nearest dealer if installation
requires the drilling of holes or other modifications
Connection box
of the vehicle.
(supplied with the DVD
• Install the unit where it does not get in the driver's
Navigation Unit)
way and cannot injure the passenger if there is a
sudden stop, like an emergency stop.
• Do not place the display in a position where it will
DVD Navigation Unit
(e.g. AVIC-9DVD)
impede the driver's visibility or affect the opera-
(sold separately)
tion of your vehicle's air bags.
To video output
DIN Front/Rear-mount
Voice guidance speaker
RCA cable
(supplied)
(sold separately)
This product
3 m
DIN Front-mount
Installation with the rubber bush
Red
1. Remove the frame. (Fig. 6)
Yellow
(VIDEO INPUT)
15 cm
Red
20 pin cable
(supplied)
Fig. 4
<ENGLISH>
• If installation angle exceeds 30° from horizontal,
the unit might not give its optimum performance.
(Fig. 5)
30°
This unit can be properly installed either from "Front" (conventional DIN Front-mount) or
"Rear" (DIN Rear-mount installation, utilizing threaded screw holes at the sides of unit
chassis). For details, refer to the following illustrated installation methods.
Frame
Pull out to remove the frame.
(When reattaching the frame, point the
side with a groove downwards and
attach it.)
Fig. 5
Fig. 6