Pioneer AVX-7300 Посібник з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з монтажу для Автомобільний приймач Pioneer AVX-7300. Pioneer AVX-7300 6 сторінок. Pioneer avx-7300 car audio video system
Також для Pioneer AVX-7300: Посібник з експлуатації (28 сторінок), Посібник з монтажу (14 сторінок), Посібник з монтажу (6 сторінок)

Друкувати сторінку

Connecting the Units

When Connecting the Multi-Channel AV Master Unit

AV cable

(supplied with the Multi-

RGB cable

Multi-Channel AV

Channel AV Master Unit)

(supplied with the Multi-

Master Unit (e.g. AVM-P9000R)

Channel AV Master Unit)

(sold separately)

Red

Gray

Green

Red (Right)

White (Left)

Yellow

Blue

Yellow

Blue

Red

(DVD VIDEO IN)

Yellow/black

Gray

To Yellow/black lead

(GUIDE ON)

Optical cable

on the navigation unit.

(supplied with the Multi-

Channel AV Master Unit)

Green

IP-BUS cable

IP-BUS

(supplied with the Multi-Channel

AV Master Unit)

RCA cable (supplied with

the DVD player)

Connection box

(supplied with the DVD

Navigation Unit)

Green

DVD Navigation Unit

(e.g. AVIC-9DVD)

(sold separately)

To video output

To audio outputs

Voice guidance speaker

RCA cables (sold separately)

(supplied)

This product

40 cm

Black

DVD player

(e.g. SDV-P7)

STAND ALONE

(sold separately)

Yellow (front

video output)

Not used.

Blue

Red

20 pin cable

3 m

(supplied)

When Connecting the Navigation Unit

To audio inputs of car stereo

To audio outputs

RCA cable

(sold separately)

Green

3 m

Red

Normally, connection is not

necessary.

If the DVD player (e.g. SDV-

P7) is installed in a location

that prevents reception of the

remote control signal, connect

with a separately sold AV-BUS

extension cable. (Or connect a

separately sold remote sensor

to the DVD player.)

3 m

Fig. 3

Installation

Note:

• Before finally installing the unit, connect the

wiring temporarily, making sure it is all connected

up properly, and the unit and the system work

properly.

• Use only the parts included with the unit to ensure

proper installation. The use of unauthorized parts

can cause malfunctions.

• Consult with your nearest dealer if installation

requires the drilling of holes or other modifications

Connection box

of the vehicle.

(supplied with the DVD

• Install the unit where it does not get in the driver's

Navigation Unit)

way and cannot injure the passenger if there is a

sudden stop, like an emergency stop.

• Do not place the display in a position where it will

DVD Navigation Unit

(e.g. AVIC-9DVD)

impede the driver's visibility or affect the opera-

(sold separately)

tion of your vehicle's air bags.

To video output

DIN Front/Rear-mount

Voice guidance speaker

RCA cable

(supplied)

(sold separately)

This product

3 m

DIN Front-mount

Installation with the rubber bush

Red

1. Remove the frame. (Fig. 6)

Yellow

(VIDEO INPUT)

15 cm

Red

20 pin cable

(supplied)

Fig. 4

• If installation angle exceeds 30° from horizontal,

the unit might not give its optimum performance.

(Fig. 5)

30°

This unit can be properly installed either from "Front" (conventional DIN Front-mount) or

"Rear" (DIN Rear-mount installation, utilizing threaded screw holes at the sides of unit

chassis). For details, refer to the following illustrated installation methods.

Frame

Pull out to remove the frame.

(When reattaching the frame, point the

side with a groove downwards and

attach it.)

Fig. 5

Fig. 6