Pioneer DEH-80PRS Series Manual de instalação - Página 5

Procurar online ou descarregar pdf Manual de instalação para Recetor para automóvel Pioneer DEH-80PRS Series. Pioneer DEH-80PRS Series 21 páginas. Cd rds receiver
Também para Pioneer DEH-80PRS Series: Manual de instalação (37 páginas), Manual de instalação (49 páginas), Manual de instalação (25 páginas)

Imprimir página

Pioneer DEH-80PRS Series Manual de instalação

Installation

# Make sure that the unit is installed securely in

place. An unstable installation may cause skipping

or other malfunctions.

DIN Rear-mount

Determine the appropriate position

where the holes on the bracket and the side

of the unit match.

Tighten two screws on each side.

1 Screw

2 Mounting bracket

3 Dashboard or console

! Use either truss (5 mm × 8 mm) or flush sur-

face (5 mm × 9 mm) screws, depending on

the bracket screw holes.

Removing the unit

Remove the trim ring.

1 Trim ring

2 Notched tab

! Releasing the front panel allows easier ac-

cess to the trim ring.

! When reattaching the trim ring, point the

side with the notched tab down.

Insert the supplied extraction keys into

both sides of the unit until they click into

place.

Pull the unit out of the dashboard.

Removing and re-attaching

the front panel

You can remove the front panel to protect your

unit from theft.

Press the detach button and push the front

panel upward and pull it toward you.

For details, refer to operation manual.

Fastening the front panel

If you do not plan to detach the front panel, the

front panel can be fastened with supplied

screws and holders.

Installation

Attach the holders to both sides of the

front panel.

1 Holder

Replace the front panel to the unit.

Flip the holders into upright positions.

Fix the front panel to the unit using fix-

ing screws.

1 Screw

Section