Pioneer DEH-80PRS Series Посібник з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з монтажу для Автомобільний приймач Pioneer DEH-80PRS Series. Pioneer DEH-80PRS Series 21 сторінка. Cd rds receiver
Також для Pioneer DEH-80PRS Series: Посібник з монтажу (37 сторінок), Посібник з монтажу (49 сторінок), Посібник з монтажу (25 сторінок)
Друкувати сторінку
Installation
# Make sure that the unit is installed securely in
place. An unstable installation may cause skipping
or other malfunctions.
DIN Rear-mount
1
Determine the appropriate position
where the holes on the bracket and the side
of the unit match.
2
Tighten two screws on each side.
3
1
2
1 Screw
2 Mounting bracket
3 Dashboard or console
! Use either truss (5 mm × 8 mm) or flush sur-
face (5 mm × 9 mm) screws, depending on
the bracket screw holes.
Removing the unit
1
Remove the trim ring.
1 Trim ring
2 Notched tab
! Releasing the front panel allows easier ac-
cess to the trim ring.
! When reattaching the trim ring, point the
side with the notched tab down.
2
Insert the supplied extraction keys into
both sides of the unit until they click into
place.
3
Pull the unit out of the dashboard.
Removing and re-attaching
the front panel
You can remove the front panel to protect your
unit from theft.
Press the detach button and push the front
panel upward and pull it toward you.
For details, refer to operation manual.
Fastening the front panel
If you do not plan to detach the front panel, the
front panel can be fastened with supplied
screws and holders.
Installation
1
Attach the holders to both sides of the
front panel.
1 Holder
2
Replace the front panel to the unit.
3
Flip the holders into upright positions.
4
Fix the front panel to the unit using fix-
ing screws.
1 Screw
Section
02
5
En