Pioneer Super Tuner IIID AVH-P4100DVD Manual de instalação - Página 2

Procurar online ou descarregar pdf Manual de instalação para Recetor para automóvel Pioneer Super Tuner IIID AVH-P4100DVD. Pioneer Super Tuner IIID AVH-P4100DVD 8 páginas. Dvd rds av receiver
Também para Pioneer Super Tuner IIID AVH-P4100DVD: Manual de instalação (43 páginas), Brochura (9 páginas), Manual de início rápido (8 páginas)

Imprimir página

Pioneer Super Tuner IIID AVH-P4100DVD Manual de instalação

1. Connecting the Units

Connecting the units

Connecting the power cord

AUX jack (3.5 ø)

Use a mini plug cable

to connect with

auxiliary device.

Note:

Depending on the kind of vehicle, the

This product

function of 3* and 5* may be different. In

this case, be sure to connect 2* to 5* and

4* to 3*.

Antenna input

Fuse (10 A)

Connect leads of the same

color to each other.

Cap (1*)

Do not remove cap if this

terminal is not in use.

Yellow (3*)

Yellow (2*)

Back-up

Connect to the constant 12 V

(or accessory)

supply terminal.

Fuse resistor

Red (5*)

Red (4*)

Accessory

Connect to terminal controlled by

(or back-up)

ignition switch (12 V DC).

Orange/white

Fuse resistor

Connect to lighting switch terminal.

Black (chassis ground)

Connect to a clean, paint-free metal location.

ISO connector

Speaker leads

Note:

White:

Front left

In some vehicles, the ISO connector may be

White/black: Front left

Gray:

Front right

divided into two. In this case, be sure to connect

Gray/black:

Front right

to both connectors.

Green:

Rear left

or subwoofer

Green/black: Rear left

or subwoofer

When you connect the separately sold

Violet:

Rear right

or subwoofer

multi-channel processor (e.g., DEQ-P6600) to

Violet/black:

Rear right

or subwoofer

this unit, do not connect anything to the

speaker leads and system remote control

(blue/white).

Connecting the units

Fuse resistor

Violet/white

Of the two lead wires connected to the back lamp, connect the one

in which the voltage changes when the gear shift is in the

REVERSE (R) position. This connection enables the unit to

sense whether the car is moving forwards or backwards.

Yellow/black

If you use equipment with Mute function, wire this lead to the

Audio Mute lead on that piece of equipment. If not, keep the

Audio Mute lead free of any connections.

Connection method

1. Clamp the lead.

2. Clamp firmly with

needle-nosed pliers.

Note:

· The position of the parking brake switch depends on the vehicle model. For details,

consult the vehicle Owner's Manual or dealer.

Light green

Used to detect the ON/OFF status of the parking brake. This lead

must be connected to the power supply side of the parking brake

switch.

Blue/white

Parking brake

Connect to system control terminal of the power

switch

Power supply side

amp (max. 300 mA 12 V DC).

Ground side

Blue/white (7*)

Blue/white (6*)

Connect to auto-antenna relay control terminal

(max. 300 mA 12 V DC).

The pin position of the ISO

connector will differ depending on

Notes:

the type of vehicle. Connect 6* and

· Change the initial setting of this unit (refer to the Operation Manual).

7* when Pin 5 is an antenna control

The subwoofer output of this unit is monaural.

type. In other types of vehicles,

· When using a subwoofer of 70 W (2 Ω) , be sure to connect with

never connect 6* and 7*.

Violet and Violet/black leads of this unit. Do not connect anything to

Green and Green/black leads.

Connecting the units

When connecting to separately sold power amp

Rear output

This product

Power amp

(sold separately)

To rear output

Power amp

(sold separately)

To front output

Power amp

Front output

(sold separately)

Subwoofer output

To subwoofer

output

Connect with RCA cables

(sold separately)

Blue/white

Connect to system control

terminal of the power amp

(max. 300 mA 12 V DC).

System remote control

Blue/white (7*)

Blue/white (6*)

Connect to auto-antenna

relay control terminal

(max. 300 mA 12 V DC).

The pin position of the ISO connector will differ

depending on the type of vehicle. Connect 6*

Left

Right

and 7* when Pin 5 is an antenna control type.

In other types of vehicles, never connect 6* and

7*.

When you connect the separately sold



multi-channel processor (e.g., DEQ-P6600) to

Subwoofer

this unit, do not connect anything to the



speaker leads and system remote control

(blue/white).

When you connect the multi-channel processor



to this unit, refer to multi-channel processor's

Front speaker



installation manual for the connection method.



Rear speaker



Perform these connections when

using the optional amplifier.

Connecting the units

When connecting with supplied USB cable

Wired remote input

Microphone

for hands-free phoning

Hard-wired remote control

(supplied with Bluetooth adapter)

adaptor can be connected

(sold separately).

Bluetooth adapter

(e.g. CD-BTB200)

(sold separately)

Blue

IP-BUS input

Black

1.5 m

This product

USB cable

IP-BUS cable

Connect to sparately sold

(Supplied with Bluetooth adapter)

1.5 m

USB device.

When connecting with optional CD-IU200V cable

Wired remote input

Microphone

Hard-wired remote control

for hands-free phoning

AUX input (AUX IN)

adaptor can be connected

(supplied with Bluetooth adapter)

(sold separately).

Bluetooth adapter

(e.g. CD-BTB200)

(sold separately)

iPod with video capabilities

(sold separately)

IP-BUS input

This product

USB input

Dock connector

1.5 m

USB cable

IP-BUS cable

(Supplied with Bluetooth adapter)

Interface cable

(CD-IU200V) (sold separately)

Black