Pioneer Super Tuner IIID AVH-P4100DVD Руководство по установке - Страница 2
Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильный приемник Pioneer Super Tuner IIID AVH-P4100DVD. Pioneer Super Tuner IIID AVH-P4100DVD 8 страниц. Dvd rds av receiver
Также для Pioneer Super Tuner IIID AVH-P4100DVD: Руководство по установке (43 страниц), Брошюра (9 страниц), Краткое руководство по эксплуатации (8 страниц)
Печатать страницу
Connecting the units
Connecting the power cord
AUX jack (3.5 ø)
Use a mini plug cable
to connect with
auxiliary device.
Note:
Depending on the kind of vehicle, the
This product
function of 3* and 5* may be different. In
this case, be sure to connect 2* to 5* and
4* to 3*.
1*
3*
2*
Antenna input
Fuse (10 A)
5*
4*
Connect leads of the same
color to each other.
Cap (1*)
Do not remove cap if this
terminal is not in use.
Yellow (3*)
Yellow (2*)
Back-up
Connect to the constant 12 V
(or accessory)
supply terminal.
Fuse resistor
Red (5*)
Red (4*)
Accessory
Connect to terminal controlled by
(or back-up)
ignition switch (12 V DC).
Orange/white
Fuse resistor
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint-free metal location.
ISO connector
Speaker leads
Note:
White:
Front left
In some vehicles, the ISO connector may be
White/black: Front left
Gray:
Front right
divided into two. In this case, be sure to connect
Gray/black:
Front right
to both connectors.
Green:
Rear left
or subwoofer
Green/black: Rear left
or subwoofer
When you connect the separately sold
Violet:
Rear right
or subwoofer
multi-channel processor (e.g., DEQ-P6600) to
Violet/black:
Rear right
or subwoofer
this unit, do not connect anything to the
speaker leads and system remote control
(blue/white).
Connecting the units
Fuse resistor
Violet/white
Of the two lead wires connected to the back lamp, connect the one
in which the voltage changes when the gear shift is in the
REVERSE (R) position. This connection enables the unit to
sense whether the car is moving forwards or backwards.
Yellow/black
If you use equipment with Mute function, wire this lead to the
Audio Mute lead on that piece of equipment. If not, keep the
Audio Mute lead free of any connections.
Connection method
1. Clamp the lead.
2. Clamp firmly with
needle-nosed pliers.
Note:
· The position of the parking brake switch depends on the vehicle model. For details,
consult the vehicle Owner's Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking brake. This lead
must be connected to the power supply side of the parking brake
switch.
Blue/white
Parking brake
Connect to system control terminal of the power
switch
Power supply side
amp (max. 300 mA 12 V DC).
Ground side
Blue/white (7*)
Blue/white (6*)
Connect to auto-antenna relay control terminal
(max. 300 mA 12 V DC).
The pin position of the ISO
connector will differ depending on
Notes:
the type of vehicle. Connect 6* and
· Change the initial setting of this unit (refer to the Operation Manual).
7* when Pin 5 is an antenna control
The subwoofer output of this unit is monaural.
type. In other types of vehicles,
· When using a subwoofer of 70 W (2 Ω) , be sure to connect with
never connect 6* and 7*.
Violet and Violet/black leads of this unit. Do not connect anything to
Green and Green/black leads.
Connecting the units
When connecting to separately sold power amp
Rear output
This product
Power amp
(sold separately)
To rear output
Power amp
(sold separately)
To front output
Power amp
Front output
(sold separately)
Subwoofer output
To subwoofer
output
Connect with RCA cables
(sold separately)
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
System remote control
Blue/white (7*)
Blue/white (6*)
Connect to auto-antenna
relay control terminal
(max. 300 mA 12 V DC).
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect 6*
Left
Right
and 7* when Pin 5 is an antenna control type.
In other types of vehicles, never connect 6* and
7*.
When you connect the separately sold
multi-channel processor (e.g., DEQ-P6600) to
Subwoofer
Subwoofer
this unit, do not connect anything to the
speaker leads and system remote control
(blue/white).
When you connect the multi-channel processor
to this unit, refer to multi-channel processor's
Front speaker
Front speaker
installation manual for the connection method.
Rear speaker
Rear speaker
Perform these connections when
using the optional amplifier.
Connecting the units
When connecting with supplied USB cable
Wired remote input
Microphone
for hands-free phoning
Hard-wired remote control
(supplied with Bluetooth adapter)
adaptor can be connected
(sold separately).
Bluetooth adapter
(e.g. CD-BTB200)
(sold separately)
Blue
IP-BUS input
Black
1.5 m
This product
USB cable
IP-BUS cable
Connect to sparately sold
(Supplied with Bluetooth adapter)
1.5 m
USB device.
When connecting with optional CD-IU200V cable
Wired remote input
Microphone
Hard-wired remote control
for hands-free phoning
AUX input (AUX IN)
adaptor can be connected
(supplied with Bluetooth adapter)
(sold separately).
Bluetooth adapter
(e.g. CD-BTB200)
(sold separately)
iPod with video capabilities
(sold separately)
IP-BUS input
This product
USB input
Dock connector
1.5 m
1.5 m
USB cable
IP-BUS cable
(Supplied with Bluetooth adapter)
Interface cable
(CD-IU200V) (sold separately)
Black