Pioneer VSX-5400 Manual de Instruções - Página 43

Procurar online ou descarregar pdf Manual de Instruções para Recetor estéreo Pioneer VSX-5400. Pioneer VSX-5400 47 páginas. Audio/video stereo receiver
Também para Pioneer VSX-5400: Manual de serviço (37 páginas)

Imprimir página

LEARNING FUNCTIONS

Questions and Answers about the Learning Function

Returning to the Initial Settings

Q: The remote control unit of my VCR has two REC (recording) keys.

1. Set the LEARN selector switch to the LEARN position.

They both have to be pressed at the same time to start recording.

2. Remove the battery cover.

What is the learning procedure in this case?

Hold one of the keys on the programmable remote control depressed

(for example the VCR @ key) until the LEARN indicator lights up,

and then press the two

keys on the VCR

remote control

simultaneously.

The remote control unit of my VCR has a REC (recording) key and

a PLAY {playback} key and they both have to be pressed at the same

time to start recording. What is the learning procedure in this case?

Hold one of the keys on the programmable remote control depressed

(for example the VCR @ key) until the LEARN indicator lights up,

and then press the REC and PLAY keys on the VCR remote control

simultaneously.

* As described above, operations which require two keys to be

pressed at the same time are programmed by pressing the two

keys simultaneously.

Operating other equipment

using the programmable

remote control unit

1. Set the LEARN switch of the programmable remote control unit to

the USE position.

2. Set the TRANSMIT mode selector switch to the desired position

(AUDIO/MIDEO/AUX).

* Set to the VIDEO position for programming as described in the

example,

3. Press the key of the desired function,

¢ The TRANSMIT indicator lights up while the remote control unit

is sending codes.

NOTE:

® When operating programmed keys, always set the LEARN switch to

the USE position. Operation is not possible in the LEARN position.

{recording etc.) ar functions

for which several codes are sent

simultaneously

{auto

functions,

timer programming,

etc.)

the

programming procedure is different and improper operation may

eecur.

3. Press any of the keys available for programming. The LEARN

indicator will illuminate.

4. Use a ball-point pen or similar object to press the RESET key while

the LEARN indicator is flashing.

Reset button

* The programmed

functions for the AUDIO, VIDEO and AUX

positions are cleared, and the remote control unit is reset to the

Pioneer uniform remote control codes.

*® Press the button gently; do not use excessive force,

<CARBII74.>