Pioneer VSX-5400 Kullanım Talimatları Kılavuzu - Sayfa 43
Stereo Alıcı Pioneer VSX-5400 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer VSX-5400 47 sayfaları. Audio/video stereo receiver
Ayrıca Pioneer VSX-5400 için: Servis Kılavuzu (37 sayfalar)
Sayfayı Yazdır
LEARNING FUNCTIONS
Questions and Answers about the Learning Function
Returning to the Initial Settings
Q: The remote control unit of my VCR has two REC (recording) keys.
1. Set the LEARN selector switch to the LEARN position.
They both have to be pressed at the same time to start recording.
2. Remove the battery cover.
What is the learning procedure in this case?
A:
Hold one of the keys on the programmable remote control depressed
(for example the VCR @ key) until the LEARN indicator lights up,
and then press the two
keys on the VCR
remote control
simultaneously.
Q:
The remote control unit of my VCR has a REC (recording) key and
a PLAY {playback} key and they both have to be pressed at the same
time to start recording. What is the learning procedure in this case?
A:
Hold one of the keys on the programmable remote control depressed
(for example the VCR @ key) until the LEARN indicator lights up,
and then press the REC and PLAY keys on the VCR remote control
simultaneously.
* As described above, operations which require two keys to be
pressed at the same time are programmed by pressing the two
keys simultaneously.
Operating other equipment
using the programmable
remote control unit
1. Set the LEARN switch of the programmable remote control unit to
the USE position.
2. Set the TRANSMIT mode selector switch to the desired position
(AUDIO/MIDEO/AUX).
* Set to the VIDEO position for programming as described in the
example,
3. Press the key of the desired function,
¢ The TRANSMIT indicator lights up while the remote control unit
is sending codes.
NOTE:
® When operating programmed keys, always set the LEARN switch to
the USE position. Operation is not possible in the LEARN position.
© For functions which require two keys to be pressed at the same time
{recording etc.) ar functions
for which several codes are sent
simultaneously
{auto
functions,
timer programming,
etc.)
the
programming procedure is different and improper operation may
eecur.
3. Press any of the keys available for programming. The LEARN
indicator will illuminate.
4. Use a ball-point pen or similar object to press the RESET key while
the LEARN indicator is flashing.
Reset button
* The programmed
functions for the AUDIO, VIDEO and AUX
positions are cleared, and the remote control unit is reset to the
Pioneer uniform remote control codes.
*® Press the button gently; do not use excessive force,
43
<CARBII74.>