Pioneer GM-6200F Manual do Proprietário - Página 11
Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Pioneer GM-6200F. Pioneer GM-6200F 14 páginas. Bridgeable four-channel power amplifier
Também para Pioneer GM-6200F: Manual do Proprietário (9 páginas), Manual de serviço (33 páginas)
Imprimir página
- 1. Before Using this Product
- 2. Information to User
- 3. Product Registration
- 4. Setting the Unit
- 5. Gain Control
- 6. Power Indicator
- 7. Input Select Switch
- 8. Connecting the Unit
- 9. Connection Diagram
- 10. Connecting the Power Terminal
- 11. Connecting the Speaker Output Terminals
- 12. Using the Speaker Input
- 13. Example of Installation on the Floor Mat or on the Chassis
- 14. Specifications
- 15. Average Current Drawn
- 16. Additional Information
Specifications
Power source .............................................................................................................. 14.4 V DC (10.8 — 15.1 V allowable)
Grounding system ............................................................................................................................................ Negative type
Current consumption ...................................................................................................... 35.0 A (at continuous power, 4 Ω)
Average current drawn* .......................................................................................................... 9.0 A (4 Ω for four channels)
Fuse .......................................................................................................................................................................... 25 A × 2
Dimensions ........................................................................................................................ 300 (W) × 61 (H) × 336 (D) mm
Weight ........................................................................................................ 3.9 kg (8.6 lbs.) (Leads for wiring not included)
Maximum power output .............................................................................................. 120 W × 4 ( 4 Ω) / 300 W × 2 ( 4 Ω)
Continuous power output ............................................................ 60 W × 4 (at 14.4 V, 4 Ω, 20 Hz — 20 kHz 0.2% THD)
Load impedance ............................................................................................................................ 4 Ω (2 — 8 Ω allowable)
Frequency response .......................................................................................................... 10 Hz — 50 kHz (+0 dB, –1 dB)
Signal-to-noise ratio ........................................................................................................................ 95 dB (IHF-A network)
Distortion ............................................................................................................................................ 0.01 % (10 W, 1 kHz)
Separation ........................................................................................................................................................ 70 dB (1 kHz)
Low pass filter ................................................................................................................................ Cut off frequency: 80 Hz
High pass filter ................................................................................................................................ Cut off frequency: 80 Hz
Gain control ...................................................................................................................................... RCA: 400 mV — 6.5 V
Maximum input level / impedance ........................................................................................................ RCA: 6.5 V / 22 kΩ
Power output ........................................................................................ 60 W RMS × 4 channels
Signal-to-noise ratio ............................................................ 80 dBA (Reference: 1 W into 4 Ω)
Note:
• Specifications and the design are subject to possible modification without notice
due to improvements.
*Average current drawn
• The average current drawn is nearly the maximum current drawn by this unit
when an audio signal is input. Use this value when working out total current
drawn by multiple power amplifiers.
<ENGLISH>
15.0 A (4 Ω for two channels)
[12 in. (W) × 2-3/8 in. (H) × 1 ft. 1 in. (D)]
150 W × 2 (at 14.4 V, 4 Ω, 20 Hz — 20 kHz 0.8% THD)
75 W × 4 (at 14.4 V, 2 Ω, 20 Hz — 20 kHz 0.8% THD)
(Bridge connection: 4 — 8 Ω allowable)
(4 Ω and
1 % THD+N)
150 W RMS × 2 channels
(4 Ω and
1 % THD+N)
75 W RMS × 4 channels
(2 Ω and
1 % THD+N)
Cut off slope: –12 dB/oct
Cut off slope: –12 dB/oct
Speaker: 1.6 — 26 V
Speaker: 26 V / 40 kΩ