Pioneer GM-6200F Manual do Proprietário - Página 12
Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Pioneer GM-6200F. Pioneer GM-6200F 14 páginas. Bridgeable four-channel power amplifier
Também para Pioneer GM-6200F: Manual do Proprietário (9 páginas), Manual de serviço (33 páginas)
Imprimir página
- 1. Before Using this Product
- 2. Information to User
- 3. Product Registration
- 4. Setting the Unit
- 5. Gain Control
- 6. Power Indicator
- 7. Input Select Switch
- 8. Connecting the Unit
- 9. Connection Diagram
- 10. Connecting the Power Terminal
- 11. Connecting the Speaker Output Terminals
- 12. Using the Speaker Input
- 13. Example of Installation on the Floor Mat or on the Chassis
- 14. Specifications
- 15. Average Current Drawn
- 16. Additional Information
Additional information
• This unit is equipped with a protective function to prevent
malfunction of the unit itself and speakers from too much
output, improper use or improper connection.
• When outputting sound at high volume etc., this function
will cut off the sound output in a few seconds. But this is
not a malfunction. When you turn down the volume of the
head unit the sound output will be restored.
• If sound output is cut, the gain control of this unit may be
improperly set. To ensure continuous sound output at
increased volume of the head unit, set the gain control of
the amplifier to a proper position according to the preout
maximum output level of the head unit (Fig. 1). There is no
need to decrease the volume of the head unit and too
much output is controlled (Fig. 2, Fig. 3).
• If you decrease the volume of the head unit and set the
gain control of the amplifier to the proper position but still
the sound cuts out from time to time, contact the nearest
authorized PIONEER Service Station.
Preout level: 6.5 V
Fig. 1 Gain control of this unit
Preout level: 4 V
Preout level: 2 V
Power
Normal gain
Equal power
Head unit volume steps
Amplifier gain
(normal)
If you raise the gain of the amplifier to an improper level, only
distortion is increased and the power increases only slightly.
Fig. 2 Relationship between the gain of the amplifier and
the output power of the head unit
Normal gain
Signal
waveform
Amplifier gain
(normal)
With high output the signal waveform is distorted, if you raise the
gain of the amplifier the power changes only slightly.
Fig. 3 Signal waveform when outputting at high volume
by the gain control of the amplifier
<English>
Power
Maximum gain
Head unit volume steps
Amplifier gain
(maximum)
Maximum gain
Equal power
Signal
waveform
Amplifier gain
(maximum)
<KMINX> <CRP1337-A/U>