Pioneer HTP-2920 Manual de Instruções - Página 2

Procurar online ou descarregar pdf Manual de Instruções para Sistema de altifalantes Pioneer HTP-2920. Pioneer HTP-2920 13 páginas. Audio multi-channel receiver
Também para Pioneer HTP-2920: Manual de início rápido (2 páginas), Instruções de utilização (2 páginas)

Pioneer HTP-2920 Manual de Instruções

PLACEMENT AND FINE TUNING

SUBWOOFER
Sound spreads in all directions in the very low frequency range.
Human hearing cannot easily detect the source of very low
frequencies. Be sure to provide a space of at least 8 inches (20 cm)
between the rear of the subwoofer and the nearest wall.
FRONT SPEAKERS
For best results the loudspeaker should be positioned near ear level
and the loudspeakers separated a distance approximately equal to
the listening distance. Angling the loudspeakers inward towards the
listener will improve the image stability for non-central listeners.
Close proximity to a side or rear wall will enhance the midbass
performance, although too close (particularly a corner location) and
the bass may be unnaturally high and image performance may be
degraded.
CENTER SPEAKER
The loudspeaker should be positioned below the TV. For best results
align the front of the loudspeaker with the front of the TV. If the
loudspeaker is placed under the TV and very close to the floor, then
tilting upwards may be beneficial.
When installing the center speaker on top of the TV, be sure to
secure it with tape or some other suitable means. Otherwise, the
speaker may fall from the TV due to external shocks such as
earthquakes, endangering those nearby or damaging the speaker.
SURROUND SPEAKERS
For best results the loudspeakers should be positioned at or above
ear level. Depending upon your room layout and preferences, the left
and right rear speakers should be positioned on the side walls just
the rear of the listening position, or on the walls.

NON-SKID PADS

If the front and surround speakers are placed on a hard surface,
such as wood or tile place four non-skid pads (small) on the bottom
flat surface of the speakers.
If the subwoofer is placed on a hard floor, such as wood or tile, place
four non-skid pads (large) on the bottom surface of the subwoofer.
2
En

STANDARD SURROUND SETUP

This is a standard multichannel surround sound speaker setup for
optimal 5.1 channel home theater sound.
Front
left
Listening position
Surround left
EXTRA POWER SETUP
This optional setup allows you to enjoy richer, fuller sound from
stereo (2.1 ch) sources.
Surround
left
Front
left
Listening position
For Front and Surround speakers
Stack the speakers and fix with the brackets.
As shown in the illustration, stack the surround speakers on top of
the front speakers. Align the bracket with the respective upper
screw hole for the surround speaker and lower screw hole for the
front speaker, and fasten the screws securely.
Surround
speaker
Front
speaker
Caution
Do not attempt to carry the speakers when they are connected
with the bracket. Doing so may cause damage to the bracket or
worsen damage to the bracket and speakers in the event they
are dropped.
Front
right
Center
Subwoofer
Surround right
Surround
right
Front
right
Center
Subwoofer
Bracket
Screw