Pioneer HTP-2920 Manual de Instruções - Página 3

Procurar online ou descarregar pdf Manual de Instruções para Sistema de altifalantes Pioneer HTP-2920. Pioneer HTP-2920 13 páginas. Audio multi-channel receiver
Também para Pioneer HTP-2920: Manual de início rápido (2 páginas), Instruções de utilização (2 páginas)

Imprimir página

CONNECTING YOUR SYSTEM

Important

Make sure all equipment is turned off before making any

connections.

• Correct wiring of your loudspeakers is essential for achieving

the best sound quality. Be careful to ensure proper polarity of

connection.

• If any of the bare speaker wire touches the back panel it may

cause the power to cut off as a safety measure.

Twist and pull off the protective shields on each wire.

Connect to the speaker terminals on the rear of the

receiver.

To connect, insert the colored wire into the matching positive

(colored) terminal and the other wire into the negative (black)

terminal as shown below.

Note that the color-coded tabs are as follows:

• Red : Front right (R)

• White : Front left (L)

• Green : Center speaker

• Purple : Subwoofer

• Grey : Surround right (R)

• Blue : Surround left (L)

Connect to the speaker terminals on the rear of the

speakers.

Match the colored wire with the color-coded label (above the tabs),

then insert the colored wire into the red (+) tab and the other wire

with the black (–) tab.

red

black

Colored marker

CABINET MAINTENANCE

Use a polishing cloth or dry cloth to wipe off dust and dirt.

When the cabinet is very dirty, clean with a soft cloth dipped in some

neutral cleanser diluted five or six times with water, and then wipe

again with a dry cloth. Do not use furniture wax or cleaners.

Never use thinners, benzine, insecticide sprays and other chemicals

on or near the cabinets, since these will corrode the surfaces.

WALL-MOUNTING THE FRONT, CENTER AND

SURROUND SPEAKER SYSTEM

Before mounting

• Remember that the speaker system is heavy and that its weight

could cause the screws to work loose, or the wall material to fail

to support it, resulting in the speaker falling. Make sure that the

wall you intend to mount the speakers on is strong enough to

support them. Do not mount on plywood or soft surface walls.

• Mounting screws are not supplied. Use screws suitable for the

wall material and support the weight of the speaker.

Mounting screw

(not supplied)

5 mm to 7 mm

(3/16 in. to 1/4 in.)

Note

• If you are unsure of the quality and strength of the walls, consult

a professional for advice.

• Pioneer is not responsible for any accidents or damage that

result from improper installation.

5 mm

(3/16 in.)

10 mm

(3/8 in.)