Dini Argeo HLD Series Manual de instruções - Página 4

Procurar online ou descarregar pdf Manual de instruções para Balanças Dini Argeo HLD Series. Dini Argeo HLD Series 13 páginas. Laboratory scale, industrial weighing systems

Imprimir página

3. INSTALLATION

a) Unpack then product.

b) If present (depending on the model), it is necessary to unscrew and remove the locking screw for the transportation

placed under the scale, as shown in the figure below:

c) Level the platform by adjusting the adjustable feet until the bubble is in the centre of the level. The stability of the

platform is very important.

ALL THE CORNERS MUST REST IN A UNIFORM WAY. Carefully check that all feet fully rest on the ground and that the

platform, loaded on the corner, is not unstable (if a corner is not resting on the ground its relative foot is easier to turn).

3.1 POWER SUPPLY AND START-UP

The indicator can be powered with a fitted 240 Vac external power adapter or just with the fitted battery.

NOTE: it is advisable to completely recharge the battery (12 hours) with the first installation of the instrument.

TO POWER the instrument through the 240 Vac mains put the AC/DC power plug in the appropriate socket under the

scale and the power adapter in the 240 Vac mains socket.

TO TURN ON/TURN OFF the instrument press the ON/OFF key.

3.2 BATTERY POWERED

The weighing indicator can be operated from the battery if desired.

When the battery needs charging the

symbol on the weight display will be empty. The battery should be charged

when the symbol is on. The scale will still operate for about 10 minutes after which it will automatically switch off to protect

the battery.

To charge the battery simply plug into the mains power. The scale does not need to be turned on.

The battery should be charged for 12 hours for full capacity.

You can find the

symbol on the display to indicate the status of battery charging. When the scale is plugged into