Aeotec MultiSensor 7 Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Automatização doméstica Aeotec MultiSensor 7. Aeotec MultiSensor 7 5 páginas.
Também para Aeotec MultiSensor 7: Manual do utilizador (8 páginas)
Imprimir página
1. Press and hold Multisensor 7 Action button
2. Wait until the LED turns into a solid orange color (2 - 5 seconds)
3. Release Multisensor 7 Action Button, the LED should remain solid
If the MultiSensor 7 LED
1-3 again, then power up your hub again.
4. Tap the Action Button on Multisensor 7 to put Multisensor 7 back to sleep, or wait 5 minutes. (recommended to manually put it back to sleep to co
Advanced settings of MultiSensor 7.
There are further advanced parameter settings and group association settings not listed in this guide. You can find the attachment of the advanced engine
which will give you all possible functions of the MultiSensor 7 that may be missing in this guide.
The PDF guide will feature these missing advanced settings:
Parameter settings (Configuration Command Class)
Group Association (Association Command Class)
You may download the engineering sheet below:
orange
orange
LED turns off right away, this would indicate that your hub is putting your device to sleep. Try unpowering yo
while it is awake. Send any configurations from your hub (assuming th