Whirlpool WGD9450WR Manual de instruções de instalação - Página 3

Procurar online ou descarregar pdf Manual de instruções de instalação para Secador Whirlpool WGD9450WR. Whirlpool WGD9450WR 32 páginas. Gas/electric

Imprimir página
WARNING:
For your safety, the information
in this manual
must be followed
to minimize
the risk of fire or explosion,
or to prevent property
damage,
personal
injury, or death.
- Do not store
or use gasoline
or other flammable
vapors and liquids in the vicinity of this
or any other appliance.
- WHAT TO DO iF YOU SMELL GAS:
= Do not try to light any appliance.
= Do not touch
any electrical
switch;
do not use any phone in your building.
= Clear the room, building,
or area of all occupants.
= Immediately
call your gas supplier
from a neighbor's
phone. Follow the gas supplier's
instructions.
• if you cannot
reach your gas supplier,
call the fire department.
- Installation
and service
must be performed
by a qualified
installer,
service
agency,
or
the gas supplier.
WARNING: Gas leaks cannot always be detected by smell.
Gas suppliers recommend
that you use a gas detector approved by UL or CSA.
For more information,
contact your gas supplier.
If a gas leak is detected,
follow the "What to do if you smell gas" instructions.
iMPORTANT: The gas installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas
Code, ANSi Z223.1/NFPA 54 or the Canadian Natural Gas and Propane installation Code, CSA B149.1.
The dryer must be electrically
grounded in accordance
with local codes, or in the absence of local codes, with the National
Electrical Code, ANSI/NFPA 70 or Canadian Electrical Code, CSA C22.1.
in the State of Massachusetts,
the following installation instructions apply:
m installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by
the State of Massachusetts.
m if using a ball valve, it shall be a T-handle type.
m A flexible gas connector, when used, must not exceed 3 feet.