Whirlpool WHD5090GW Manual de utilização e cuidados - Página 14

Procurar online ou descarregar pdf Manual de utilização e cuidados para Secador Whirlpool WHD5090GW. Whirlpool WHD5090GW 35 páginas. Heat pump dryer

INSTALLATION INSTRUCTIONS

TOOLS AND PARTS

Gather the required tools and parts before starting installation.

Tools needed:

Flat-blade screwdriver

Min. 8" long TORX

T20

®†

screwdriver

Wire stripper (direct wire

installations)

Adjustable wrench that

opens to 1" (25 mm) or

hex-head socket wrench

Utility knife

Level

#2 Phillips screwdriver

1/4" and 5/16" nut driver

(recommended)

Channel locks

Pliers

Tape measure

If using a power supply cord:

Use a UL-listed power supply cord kit marked for use with

clothes dryers. The kit should contain:

A UL-listed 30-amp power supply cord, rated 120-/240-volt

minimum. The cord should be type SRD or SRDT and

be at least 4 ft. (1.22 m) long. The wires that connect to

the dryer must end in ring terminals or spade terminals

with upturned ends.

Additional Accessories:

Refer to "Operating Instructions" for information about

accessories available for your dryer.

†® TORX and T20 are registered trademarks of Acument Intellectual Properties, LLC.

(Not supplied with dryer)