Calandra Racing Concepts Battle Axe 2.0 Manual de montagem - Página 13

Procurar online ou descarregar pdf Manual de montagem para Carro de brincar motorizado Calandra Racing Concepts Battle Axe 2.0. Calandra Racing Concepts Battle Axe 2.0 16 páginas. 1:10th oval weapon from team crc

Imprimir página
4-40 x 1/8"
Set Screw
Bag 10
82
Adjust body height
by raising or
lowering this collar
83
79
Red Socket Cap
Bag 11
M3 x 8mm Steel
Button Head
80
82
81
60
80
4-40 x 3/8"
3/16" Shim
85
60
9
85
84
4-40 x 3/8"
Red Socket Cap
60
B
P
ODY
OSTS
1 - Secure the shorter front body posts [79] to the front bumper with
the steel button head screws [80].
2 - Mount the longer rear body posts [81] to the Tweak Plates, using
the red socket cap screw [60]. The tweak plates have two body
mount locations to accommodate numerous body sizes and styles.
Choose the hole that will work best with your body.
3 - Thread the 1/8" set screw [82] into the plastic collars [83]. Adjust
the collar up and down the body post to accommodate the body shell
used. Lock the collar with the set screw.
3/16" x 5/16"
Flanged Bearing
Red Locknut
9
84
1 - Use the 4-40 x 3/8" red cap head screws [60] to bolt the
rear wheels to the hubs.
2 - Insert the flanged bearings [84] into the front wheels.
Place a 3/16" shim [85] over the axle, then the front wheel, &
then a red locknut [9] last. The front wheels should spin very
free. Do not over-tighten the front wheel nuts so that the
bearings are pinched.
3 - Install the Nerf Wing [86] using two 4-40 x 5/16" red FH
screws [56] and two red locknuts [9].
60
Two rear body
mount locations
4-40 x 5/16"
56
Red FH
(Tires not included)
9
86
56
12