Whirlpool UXT4230AD Manual de instruções de instalação - Página 12

Procurar online ou descarregar pdf Manual de instruções de instalação para Campânula de ventilação Whirlpool UXT4230AD. Whirlpool UXT4230AD 34 páginas. 30" (76.2 cm) and 36" (91.4 cm) range hood
Também para Whirlpool UXT4230AD: Instruções de instalação e manual de utilização e cuidados (28 páginas), Instruções de instalação e manual de utilização e cuidados (28 páginas), Instruções de instalação e manual de utilização e cuidados (28 páginas)

Make Electrical Connection

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1. Disconnect power.

A. White wires

B. Black wires

C. UL listed wire connector

D. Green (or bare) ground wire

2. Use UL listed wire connectors and connect white wires (A)

together.

3. Use UL listed wire connectors and connect black wires (B)

together.

E. Home power supply cable or

power cord accessory kit

F. UL listed or CSA approved

½" strain relief

G. Green ground screw

WARNING

Fire Hazard

Electrically ground the blower.

Use copper wire.

Connect ground wire to green ground screw in

terminal box.

Failure to do so can result in death, fire, or

electrical shock.

4. Connect green (or bare) ground wire from power supply to

green ground screw in terminal box and securely tighten.

5. Install terminal box cover.

6. Reconnect power.

1. Install the 75W (max.) Incandescent light bulb. See

"Replacing the Incandescent Light Bulb" in the "Range Hood

Care" section.

2. Replace grease filter if removed. See the "Range Hood Care"

section.

3. Check the operation of the range hood fan and light. See

"Range Hood Use" section.

If range hood does not operate, check to see whether a

circuit breaker has tripped or a household fuse has blown.

Disconnect power and check wiring connections.

NOTE: To get the most efficient use from your new range hood,

read the "Range Hood Use" section.