3Com OfficeConnect WX1200 Manual de início rápido - Página 6
Procurar online ou descarregar pdf Manual de início rápido para Hardware de rede 3Com OfficeConnect WX1200. 3Com OfficeConnect WX1200 10 páginas. Secure converged networks enterprise edition
Também para 3Com OfficeConnect WX1200: Manual de início rápido (2 páginas), Manual de início rápido (10 páginas), Ficha de dados (6 páginas), Manual do produto (15 páginas)
Imprimir página
6
W
LAN S
IRELESS
WITCH AND
Another question the script asks is, "Do you wish to
configure wireless?" If you answer y, the script goes
on to ask you for SSID and user information, for
unencrypted and encrypted SSIDs. If you answer n,
the script generates key pairs for SSH and the admin-
istrative users you entered, generates a self-signed
administrative certificate, and then ends.
WX1200# quickstart
This will erase any existing config. Continue?
[n]: y
Answer the following questions. Enter '?' for
help. ^C to break out
System Name [WX1200]: WX1200-Corp
System Name [WX1200]: WX1200-Corp
Country Code [US]: US
System IP address []: 10.10.10.4
System IP address netmask []: 255.255.255.0
Default route []: 10.10.10.1
Admin username [admin]: wxadmin
Admin password []: letmein
Do you wish to set the time? [y]: y
Enter the date (dd/mm/yy) []: 15/11/04
Enter the time (hh:mm:ss) []: 18:58:00
Enter the timezone []: PST
Enter the offset from GMT for 'PST' in hh:mm
[0:0]: -8
Do you wish to configure wireless? [y]: y
Enter a clear SSID to use: public
Do you want to do WEB-AAA? [y]: y
C
Q
S
G
ONTROLLER
UICK
TART
UIDE
Enter a username with which to do web-aaa, <cr>
to exit: user1
Enter a password for user1: pass1
Enter a username with which to do web-aaa, <cr>
to exit: user2
Enter a password for user2: pass2
Enter a username with which to do web-aaa, <cr>
to exit:
Do you want to do 802.1x and PEAP-MSCHAPv2? [y]:
y
Enter a crypto SSID to use: corporate
Enter a username with which to do PEAP-MSCHAPv2,
<cr> to exit: alice
Enter a password for alice: alicepass
Enter a username with which to do PEAP-MSCHAPv2,
<cr> to exit: bob
Enter a password for bob: bobpass
Enter a username with which to do PEAP-MSCHAPv2,
<cr> to exit:
Do you wish to configure access points? [y]: y
Enter a port number [1-20] on which an AP
resides, <cr> to exit: 2
Enter AP model on port 2: ap2750
Enter a port number [1-20] on which an AP
resides, <cr> to exit: 3
Enter AP model on port 3: ap2750
Enter a port number [1-20] on which an AP
resides, <cr> to exit:
Do you wish to configure distributed access
points? [y]: n
success: created keypair for ssh