AlcoSense ELITE Manual de instruções - Página 15
Procurar online ou descarregar pdf Manual de instruções para Equipamento de teste AlcoSense ELITE. AlcoSense ELITE 20 páginas.
Imprimir página
- 1. Table of Contents
- 2. Introduction
- 3. Getting Started
- 4. Turning On/Off
- 5. Setting Time
- 6. Changing Units of Measurement
- 7. Activating the Sensor
- 8. Automatic Sensor Clean (ASC)
- 9. How to Establish if an ASC Is Needed
- 10. Quick Sensor Clean
- 11. Performing a Blow Test
- 12. Understanding the Results
- 13. Maintaining Your Alcosense
- 14. Accessories
- 15. Servicing
- 16. Legal
Model
Example of Screen
Explanation
Zero or Trace Alcohol
There is either no alcohol in the sample or such a
small amount it is negligible. The reading is well
below the legal drink drive limit.
Low Levels
The sample has alcohol in it but it is below
the limit that has been set and therefore
recommended you don't drive.
Close to the Limit
The sample was very close to the legal drink drive
limit and could be borderline. DO NOT DRIVE.
Over the Limit
The sample is at or above the legal drink drive
limit. DO NOT DRIVE.
The sample's alcohol level is above 1.5‰BAC
and is outside the reading range of this device.
DO NOT DRIVE.
There has been an error while performing
the breath test. This is normally caused by
either blowing too hard or too softly into the
AlcoSense. See page 10, bullet point 3 or call us.
15