Xerox 3270 Manual do programador - Página 11
Procurar online ou descarregar pdf Manual do programador para Impressora Xerox 3270. Xerox 3270 34 páginas. Xerox electronic documentation laser 3270 programmer's guide
Imprimir página3270 Programmer's Guide
Function Selection via the Line
Once a character has been defined as the ESC character, it cannot
be printed or used as a normal character. However, it is not neces-
sary to have an ESC character defined permanently. When the ESC
character has served its purpose, it can be deleted.
When you have defined an ESC character in the converter, the
following facilities will be available to you:
Sending HEX codes (00 to FF) directly to the printer
Changing the settings of the converter
Sending special commands to the converter (e.g. to save the
contents of the temporary memory in the permanent memory).
When the converter receives the characters following the ESC
character, it will use them for special purposes.
Below you will find examples of FSL commands, where "%" is the
defined ESC character :
Escape Sequence
%Y6,100%
%Y8,04%
%Y61,1,1B,26,6C,32,58%
NOTE:
In FSL mode, the notations ":" and ";" have special
meanings in the FSL Functions 75 and 80. See
D62071, the section "Overwriting the Translate
Tables" for more information.
Function
Set Function 6: Maximum Print Posi-
tion (MPP) to 100
Set Function 8, LU1 Language, to
Belgian
Define user string 1 with the PCL
command "print 2 copies"
- 11 -