Xerox 3270 Programcı El Kitabı - Sayfa 11

Yazıcı Xerox 3270 için çevrimiçi göz atın veya pdf Programcı El Kitabı indirin. Xerox 3270 34 sayfaları. Xerox electronic documentation laser 3270 programmer's guide

Sayfayı Yazdır

3270 Programmer's Guide

Function Selection via the Line

Once a character has been defined as the ESC character, it cannot

be printed or used as a normal character. However, it is not neces-

sary to have an ESC character defined permanently. When the ESC

character has served its purpose, it can be deleted.

When you have defined an ESC character in the converter, the

following facilities will be available to you:

Sending HEX codes (00 to FF) directly to the printer

Changing the settings of the converter

Sending special commands to the converter (e.g. to save the

contents of the temporary memory in the permanent memory).

When the converter receives the characters following the ESC

character, it will use them for special purposes.

Below you will find examples of FSL commands, where "%" is the

defined ESC character :

Escape Sequence

%Y6,100%

%Y8,04%

%Y61,1,1B,26,6C,32,58%

NOTE:

In FSL mode, the notations ":" and ";" have special

meanings in the FSL Functions 75 and 80. See

D62071, the section "Overwriting the Translate

Tables" for more information.

Function

Set Function 6: Maximum Print Posi-

tion (MPP) to 100

Set Function 8, LU1 Language, to

Belgian

Define user string 1 with the PCL

command "print 2 copies"

- 11 -