Yamaha AvantGard N3 Manual de manutenção - Página 28

Procurar online ou descarregar pdf Manual de manutenção para Instrumento musical Yamaha AvantGard N3. Yamaha AvantGard N3 45 páginas. Hybrid piano

NU1

5. Key Stopper Rail

Remove the left/right screws [S2NC] (one each) and the two hex nuts [28], and the two plastic washers [26], and remove the

key stop rail.

* Be careful not to lose any of the damper holder spacers when attaching or removing the key stop rail.

* Adjust the height of the key stop rail assembly by increasing or decreasing the number of damper holder spacers.

6. Key Block

Remove each of the two screws [S2E], and remove the L and R key blocks.

7. Key Sensor

7-1

Remove all the keys.

* Be careful not to damage the key shutters attached to the keys when installing or removing the keys.

7-2

Remove the eight (8) screws marked [230]. The key sensor unit can then be removed.

* Place a mark of the key sensor unit on the keybed before removal and make sure to install it at the original position.

[S2NC]

DAMPER HOLDER SPACER

[S2E]

KEY BLOCK L

KEY SENSOR UNIT

[230]

[26], [28]

KEY STOPPER RAIL ASSEMBLY

KEYS

[S2NC]

DAMPER HOLDER SPACER

[S2E]

KEY BLOCK R

[230]

KEYBED

Marking