ACOPOWER HY-PTK-100WPX20A Manual - Página 6

Procurar online ou descarregar pdf Manual para Painel solar ACOPOWER HY-PTK-100WPX20A. ACOPOWER HY-PTK-100WPX20A 13 páginas.

HY-PTK-100WPX20A

2. Indicators Description and Operation

2.1 OPERATION - LCD DISPLAY

Please check your battery manufacturer's specifications to select correct battery type. The unit provides eight ( 8 )

battery types for selections: Lead crystal, Lithium-ion, LiFePO4, LTO, Gel, AGM, WET (conventional lead acid),

and Calcium battery.

Press BATTERY TYPE button and hold for 3 seconds to go into your battery type selection mode, the battery type

you select will be shown on the LCD meter, the default setting is AGM Battery; the controller will automatically me

morize your battery type setting.

Li-ion battery shown in LCD indicates 3-SERIES Li-ion battery shown as below:

-- Lithium Cobalt Oxide LiCoO2 (LCO) battery

-- Lithium Manganese Oxide LiMn2O4 (LMQ) battery

-- Lithium Nickel Manganese Cobalt Oxide LiNiMnCoO2 (NMC) battery

-- Lithium Nickel Cobalt Aluminum Oxide LiNiCoAlo2 (NCA) battery

Remarks: This solar controller is recommended to just work with 3 x series above Li-ion batteries.

LiFePO4 battery shown in LCD indicates Lithium Iron Phosphate battery, LFP battery.

LTO battery shown in LCD indicates Lithium titianate oxidized, Li4Ti5O12 battery.

Caution: Incorrect battery type setting may damage your battery.

When the controller powers on, the unit will run self-qualify mode and automatically show below items on LCD

before going into charging process

4120 Valley Blvd Walnut, CA 91789, USA

www.ACOPower.com

+1-626-737 1140