Clarke CMFT250 Instruções de funcionamento e manutenção - Página 14
Procurar online ou descarregar pdf Instruções de funcionamento e manutenção para Ferramenta eléctrica Clarke CMFT250. Clarke CMFT250 20 páginas. Multi function tool kit
Imprimir páginaMAINTENANCE
Before starting any cleaning or maintenance, always ensure the tool is
isolated from the electrical supply by switching off and removing the plug
from the power socket.
BEFORE USE
1. Always inspect the tool before use and ensure it is in top condition.
2. Ensure all fixing screws remain tight to ensure the tool is in safe working
condition.
3. Inspect the power cable to ensure it is sound and free from damage.
CLEANING
1. Ensure all air ventilation slots are clear, (Use compressed air to clean the
tool if possible. Always wear protective goggles when cleaning with
compressed air).
2. Clean the exterior of the tool with a soft cleaning cloth. Never use any
chemicals or harsh abrasives. Avoid using solvents when cleaning plastic
parts, which may be susceptible to damage from various types of
commercial solvents.
GENERAL MAINTENANCE
• All bearings etc, in this tool are lubricated with a sufficient amount of high
grade lubricant for the tools lifetime under normal operating conditions,
therefore no further lubrication is necessary.
• The carbon brushes in the tool will eventually wear down to such an
extent that sparks will be noticed inside the tool and its performance will
deteriorate. Brushes are a consumable spare which should be replaced
by your Clarke dealer or power tool repairer.
• Refer to your CLARKE dealer if internal maintenance is required.
CONSUMABLE SPARE PARTS
The Multi-Function Tool Accessory Kit - (Part No
6462202) includes the following and is available from
your CLARKE dealer. This includes:
2 x 32 mm Straight Blade
1 x 20 mm Straight Blade
1 x Grout Removing Disc
1 x Semi-Circular Saw Blade
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
14