- ページ 14

電動工具 Clarke CMFT250のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke CMFT250 20 ページ。 Multi function tool kit

MAINTENANCE

Before starting any cleaning or maintenance, always ensure the tool is

isolated from the electrical supply by switching off and removing the plug

from the power socket.

BEFORE USE

1. Always inspect the tool before use and ensure it is in top condition.

2. Ensure all fixing screws remain tight to ensure the tool is in safe working

condition.

3. Inspect the power cable to ensure it is sound and free from damage.

CLEANING

1. Ensure all air ventilation slots are clear, (Use compressed air to clean the

tool if possible. Always wear protective goggles when cleaning with

compressed air).

2. Clean the exterior of the tool with a soft cleaning cloth. Never use any

chemicals or harsh abrasives. Avoid using solvents when cleaning plastic

parts, which may be susceptible to damage from various types of

commercial solvents.

GENERAL MAINTENANCE

• All bearings etc, in this tool are lubricated with a sufficient amount of high

grade lubricant for the tools lifetime under normal operating conditions,

therefore no further lubrication is necessary.

• The carbon brushes in the tool will eventually wear down to such an

extent that sparks will be noticed inside the tool and its performance will

deteriorate. Brushes are a consumable spare which should be replaced

by your Clarke dealer or power tool repairer.

• Refer to your CLARKE dealer if internal maintenance is required.

The Multi-Function Tool Accessory Kit - (Part No

6462202) includes the following and is available from

your CLARKE dealer. This includes:

2 x 32 mm Straight Blade

1 x 20 mm Straight Blade

1 x Grout Removing Disc

1 x Semi-Circular Saw Blade

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]