Clarke CPSB100B Manual de Instruções de Operação e Manutenção - Página 7
Procurar online ou descarregar pdf Manual de Instruções de Operação e Manutenção para Ferramenta eléctrica Clarke CPSB100B. Clarke CPSB100B 17 páginas.
Imprimir página
3. Connect the sandblasting gun to
the other end of the hose using a
suitable spanner to ensure an air-
tight seal. Ensure the inlet
connector is tightly fitted to the
gun.
• A spare gun closing block is
supplied for future use.
OPERATION
WARNING: ALWAYS WEAR YOUR HOOD, DUST MASK AND HEAVY DUTY
CANVAS GLOVES WHEN OPERATING THE SANDBLASTER.
WARNING: BEFORE OPERATING YOUR SANDBLASTER, INSPECT EACH
CONNECTION, DOUBLE CHECKING TO MAKE SURE THAT ALL ARE TIGHT
AND PROPERLY SEALED.
WARNING: THIS SANDBLASTER IS NOT INTENDED FOR USE WITH SILICA
BASED ABRASIVES. WHICH HAVE BEEN LINKED TO SEVERE RESPIRATORY
DISEASE. ALWAYS USE SILICA SUBSTITUTES (SUCH AS CLARKE GLASS BEAD
ABRASIVE.
SAFETY AND HEALTH CONSIDERATIONS
• Before opening the tank make sure it is not pressurized. Ensure the
pressure gauge reads "0". If it does not, release pressure from the
tank (See page 10).
• Disconnect the compressor before opening the tank. Protect
yourself and those around you from "over-spray". Remember that
your sandblaster is shooting a powerful spray of abrasive material.
Do not point it at yourself or anyone around you.
• Wear protective clothing including protective hood and heavy
gloves when using this sandblaster.
• Wear a dust mask over your mouth when using this sandblaster. You
will create a cloud of abrasive material and debris which is
dangerous to inhale.
• Protect anything around you that may be damaged from the spray
of abrasive particles. Nothing subject to contamination damage or
with a fine surface should be near your sandblaster work area.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Fig 7
7