Clarke CPSB100B Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 7

Elektrikli Alet Clarke CPSB100B için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke CPSB100B 17 sayfaları.

3. Connect the sandblasting gun to

the other end of the hose using a

suitable spanner to ensure an air-

tight seal. Ensure the inlet

connector is tightly fitted to the

gun.

• A spare gun closing block is

supplied for future use.

OPERATION

WARNING: ALWAYS WEAR YOUR HOOD, DUST MASK AND HEAVY DUTY

CANVAS GLOVES WHEN OPERATING THE SANDBLASTER.

WARNING: BEFORE OPERATING YOUR SANDBLASTER, INSPECT EACH

CONNECTION, DOUBLE CHECKING TO MAKE SURE THAT ALL ARE TIGHT

AND PROPERLY SEALED.

WARNING: THIS SANDBLASTER IS NOT INTENDED FOR USE WITH SILICA

BASED ABRASIVES. WHICH HAVE BEEN LINKED TO SEVERE RESPIRATORY

DISEASE. ALWAYS USE SILICA SUBSTITUTES (SUCH AS CLARKE GLASS BEAD

ABRASIVE.

• Before opening the tank make sure it is not pressurized. Ensure the

pressure gauge reads "0". If it does not, release pressure from the

tank (See page 10).

• Disconnect the compressor before opening the tank. Protect

yourself and those around you from "over-spray". Remember that

your sandblaster is shooting a powerful spray of abrasive material.

Do not point it at yourself or anyone around you.

• Wear protective clothing including protective hood and heavy

gloves when using this sandblaster.

• Wear a dust mask over your mouth when using this sandblaster. You

will create a cloud of abrasive material and debris which is

dangerous to inhale.

• Protect anything around you that may be damaged from the spray

of abrasive particles. Nothing subject to contamination damage or

with a fine surface should be near your sandblaster work area.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

Fig 7