Clarke STRONG-ARM CSA12F Manual de Instruções de Operação e Manutenção - Página 6
Procurar online ou descarregar pdf Manual de Instruções de Operação e Manutenção para Ferramenta eléctrica Clarke STRONG-ARM CSA12F. Clarke STRONG-ARM CSA12F 17 páginas. 12 tonne hydraulic press
Também para Clarke STRONG-ARM CSA12F: Manual de Instruções de Operação e Manutenção (17 páginas)
Imprimir página
12. Unscrew the air bleed valve and
check that the pump is filled with
hydraulic oil up to a visible level.
13. If empty, the total capacity is
630ml.
14. Attach the pump support plate to
the right-hand side support using
the fixing bolts, nuts and washers,
ensuring it is level before
tightening the bolts.
15. Bolt the pump to the support
plate using the socket head bolts
from below, then screw the pump
handle into the pump actuating
lever.
16. A set of mandrels complete with
storage bracket is available from
your Clarke dealer. If this is
provided, bolt the mandrel
storage bracket to the side of the
frame using the bolts supplied.
17. If fitted, store the mandrels
(including the adaptor) in their
positions on the bracket.
PUMP/RAM OPERATION
1. Before using the press, purge any
air from the system by opening
the release valve (turning it anti-
clockwise) and pumping several
full strokes to eliminate any air
bubbles.
2. Check all parts are secure and
correctly aligned before using the
press.
• The press is now ready for use.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6