Clarke STRONG-ARM CSA12F Manual de Instruções de Operação e Manutenção - Página 5
Procurar online ou descarregar pdf Manual de Instruções de Operação e Manutenção para Ferramenta eléctrica Clarke STRONG-ARM CSA12F. Clarke STRONG-ARM CSA12F 17 páginas. 12 tonne hydraulic press
Também para Clarke STRONG-ARM CSA12F: Manual de Instruções de Operação e Manutenção (17 páginas)
Imprimir página
7. With the upper ring already
screwed home onto the ram
body as supplied, lower the ram
through the hole in the base plate
and secure in position using the
locking collar.
8. Insert the bed support pins into
the holes in the side support at a
height of your choosing. Then
lower the bed frame onto the
pins.
9. Screw the pressure gauge to the
connecting nut on top of the ram
cylinder. Seal the thread with PTFE
tape, ensuring it is tight when the
gauge is facing the front of the
press.
10. Pass the hydraulic hose through
the gap between the two cross
beams. Unfasten the protective
hose caps and screw the hose
onto the threaded connection of
the hydraulic ram.
11. We recommend sealing the thread with PTFE tape. Take care not to let any
oil escape while connecting the hose.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5